CostGuide.ca

What home projects cost in Alberta

For contractors

How much does an electrical panel upgrade cost in Edmonton?

An electrical panel upgrade in Edmonton costs $2,200 to $6,500 for a standard job with a new panel, breakers, permit and inspection, according to one local electrician. A swap that keeps the same service size runs $2,200 to $4,000. Whether the incoming service, mast and meter base also need replacing moves the price most.

By the CostGuide.ca editorial team. Published 28 October 2026. Prices checked October 2026 against 11 sources.

Get a quote from a local electrician

How much does each type of panel upgrade cost in Edmonton?

A panel swap with no service upsize starts the Edmonton range at $2,200 to $4,000, a standard upgrade runs $2,200 to $6,500, and a larger or future-ready installation sits at the top at $6,200 to $7,316.

Edmonton panel upgrade prices

Low to high range

JobLowHigh
Standard panel upgrade (new panel and breakers, permit and inspection)$2,200 to $6,500per job $2,200 $6,500
Panel swap, no service upsize$2,200 to $4,000per job $2,200 $4,000
Electrical panel upgrade, common starting range$2,500 to $5,000per job. Full service work (meter base, service conductors, grounding) can add more $2,500 $5,000
Panel upgrade, essential base installation$2,800 to $3,304per job. Planning range for Calgary, Edmonton and Red Deer. Permits, code work and access can change the final price $2,800 $3,304
Panel upgrade, larger or future-ready installation$6,200 to $7,316per job. Planning range for Calgary, Edmonton and Red Deer $6,200 $7,316
Panel upgrade, 100 to 200 amp, when adding an EV charger$1,500 to $3,000per job. Quoted as an add-on to a charger install $1,500 $3,000

Prices in CAD as local contractors publish them. Most do not say whether 5% GST is included, so ask for GST as its own line. Alberta has no PST. Checked October 2026.

The panel ranges above come from three Edmonton electrical contractors and one company working across Calgary, Edmonton and Red Deer. Most of these sources do not state whether GST is in the price. Fewer Edmonton contractors publish detailed service upgrade prices than in Calgary, so ask any Edmonton quote to separate the panel from the service work.

A lot of Edmonton panel work starts with an EV charger install. One local installer reports that older 100 amp panels are common in pre-2000 Edmonton homes, which is why many charger quotes come with a panel upgrade or a load manager attached.

Want a real number for your electrical panel?

What do you need?

How much does an EV charger cost to install in Edmonton?

Edmonton quotes for a Level 2 charger run $1,500 to $4,000, and one local electrician posts $2,795 for a hardwired 48 amp charger with the charger, permit and inspection included.

Edmonton EV charger and load management prices

Low to high range

JobLowHigh
Level 2 EV charger installation, range of Edmonton quotes$1,500 to $4,000per job. Quotes vary with what is included $1,500 $4,000
EV outlet (NEMA 14-50) for your own portable charger, up to 40 ft of cable$1,995per job. Permit and inspection included $1,995 $1,995
Hardwired 48 amp Level 2 charger, charger included, up to 40 ft of cable$2,795per job. Permit and inspection included $2,795 $2,795
EV load management device, installed$1,200 to $1,500per job $1,200 $1,500

Prices in CAD as local contractors publish them. Most do not say whether 5% GST is included, so ask for GST as its own line. Alberta has no PST. Checked October 2026.

What do other common electrical jobs cost in Edmonton?

Pot lights cost $80 to $150 each in Edmonton, basement rough-in wiring runs $2,000 to $5,000, and one electrician bills $110 an hour plus GST with a three-hour minimum.

Edmonton electrical jobs and rates

Low to high range

JobLowHigh
Pot light installation$80 to $150per light. Depends on attic access and drywall $80 $150
Basement rough-in wiring$2,000 to $5,000per basement. Depends on square footage $2,000 $5,000
Electrician, regular hours (three-hour minimum)$110per hour. Plus GST, the source says $110 $110
Minimum service call (three hours of one journeyman, travel included)$330per visit. Plus GST, the source says $330 $330
After-hours emergency call (first three hours of one journeyman)$495per visit. Plus GST, the source says $495 $495

Prices in CAD as local contractors publish them. Most do not say whether 5% GST is included, so ask for GST as its own line. Alberta has no PST. Checked October 2026.

What makes one Edmonton panel quote higher than another?

Scope matters most: a panel-only swap costs far less than a service upgrade, and the meter base, service conductors and grounding add to the bill when they have to be replaced.

  • Panel swap or service upgrade. An Edmonton contractor explains that a service upgrade costs more because it increases the total power supplied to the home, and it involves work outside the panel. A swap that keeps the same amperage sits at $2,200 to $4,000. [2] [1]
  • Meter base and service entrance. Full service work can involve the meter base, service conductors, grounding, utility coordination and permit costs, an Edmonton contractor notes. If the meter base or service entrance has to go, the job can run into a second day. [2] [1]
  • Overhead or underground. One Edmonton electrician posts a price for overhead service upgrades with a new mast and meter base, but prices underground services only after inspecting the run on site. [1]
  • Why you are upgrading. If the upgrade is only for an EV charger, a load management device at $1,200 to $1,500 installed may make it unnecessary. An Edmonton installer quotes $1,500 to $3,000 for the panel upgrade when one is needed alongside a charger. [5] [4]
  • Panel features. Planning ranges for a basic replacement and a larger, future-ready installation differ by thousands, as the $2,800 to $3,304 and $6,200 to $7,316 rows show. Surge protection, generator readiness and EV planning are listed as add-ons that can change the total. [3]

Should you upgrade the panel or add a load manager in Edmonton?

If the only new load is an EV charger and the load calculation shows it nearly fits, a load manager costs far less where it fits; if you are adding several big loads, a panel and service upgrade is the longer-term fix.

Load manager

A device that turns the charger down when the house is drawing a lot of power. It costs $1,200 to $1,500 installed, and an Edmonton-area installer says that when it fits, it saves thousands against a service upgrade. [5]

Worked example

The same installer shows a 100 amp house with a calculated load of 65.2 A. Adding a 40 A charger at full setting puts it 5.2 A over. Having the electrician set the charger to 32 A brings it within the limit, and a load manager instead gives the charger whatever the house leaves. [5]

Panel and service upgrade

The better choice if you are adding an EV, solar panels, a suite or air conditioning together, since a load manager only shares out the capacity you already have. [5] [11]

How long does a panel upgrade take in Edmonton?

Most Edmonton panel upgrades are a one-day job with the power off for most of that day, and a second day is sometimes needed if the meter base or service entrance is replaced.

  1. Permit. The electrician applies for the City of Edmonton electrical permit. For homeowner permits, the City's form says work must start within 90 days. [8] [9]
  2. EPCOR disconnect. For a service change, the City says to contact EPCOR Meters about the disconnect and reconnect. [8]
  3. Install day. The old panel comes out and the new one goes in, with breakers relabelled. Power is off for most of a working day, an Edmonton electrician says. [1]
  4. Inspection. The City inspects the work under the permit. An Edmonton electrician says it books the inspection and attends when the inspector comes. [1]

What happens with knob and tube or aluminum wiring in Edmonton?

An Edmonton electrician says existing knob and tube is not illegal but cannot be extended, and that aluminum wiring can often be made safe at the connections rather than fully replaced.

Knob and tube

Existing knob and tube can stay in place, but new circuits cannot be added to it, a local electrician notes. Any work on it needs a permit, since the City requires one for any addition to an electrical system. [7] [8]

Aluminum wiring

The same electrician uses CSA-approved connectors at every device and junction and replaces runs only where they are damaged. It says most insurers accept that kind of remediation, though that is a contractor's view, not an insurer's. [7]

Rewiring prices

We found no published Edmonton prices for rewiring or aluminum remediation. Local electricians quote it in writing after seeing the house, so ask for an itemized quote and compare at least two. [7]

What City rules apply to electrical work in Edmonton?

Edmonton requires a permit for almost all new electrical work, limits homeowner permits to owners of single detached homes doing their own work, and asks contractors to hold a City business licence.

When do you need an electrical permit in Edmonton?

The City of Edmonton says all new electrical installations need a permit, including renovations, basement developments, hot tubs, garage wiring and EV charging stations (as at October 2026). Service upgrades, new circuits for outlets or lighting, and aluminum wiring repair or replacement also need one. [8]

Who can get a homeowner electrical permit in Edmonton?

Only an owner who lives in a single-family house and does the work personally. Apartment-style condos, stacked, semi-detached and row housing do not qualify, nor do rentals (as at October 2026). The City will not issue a homeowner permit if the wiring is already concealed behind boarded or drywalled walls. [8]

Can an Edmonton homeowner change their own main panel?

No, unless they are a certified master electrician. The City's homeowner application says homeowners may not install or relocate the main service panel or service equipment, do pool grounding or install solar panels. This comes from the City's homeowner permit application form dated March 2020, so check it is still current when you apply. [9]

What does an Edmonton homeowner pay for an electrical permit?

A homeowner doing minor alterations pays a $160 fee plus a $6.40 safety codes fee (as at October 2026). Contractor permit fees are set differently and were not checked for this guide, so ask your electrician what the permit adds to the quote. [8]

Who handles service upgrades in Edmonton, the City or EPCOR?

The City. Service changes and upgrades, and emergency repairs, stay with the City of Edmonton, while EPCOR handles service inspections only for new installations where there has never been power before (as at October 2026). For disconnects and reconnects during a service change, the City says to contact EPCOR Meters. Service upgrades of 400 amps or more need single-line drawings with the permit. [10] [8]

Does an electrician need a City licence in Edmonton?

Yes. The City of Edmonton says an electrical contractor must have a valid City of Edmonton business licence (as at October 2026). The City's homeowner permit form adds that a homeowner permit expires after one year without an extension request. [8] [9]

What should an Edmonton panel upgrade quote include?

An Edmonton panel upgrade quote should say whether it is a swap or a service upgrade, list the panel, breakers, meter base and grounding work, include the City permit, the EPCOR disconnect and the inspection, and show GST separately.

  • Panel swap or service upsize, and the new amperage
  • Panel make, breaker count and spare spaces left
  • Mast, meter base, service conductors and grounding, if included
  • Overhead or underground service, and how underground work is priced
  • City of Edmonton permit and inspection
  • Who books the EPCOR disconnect and reconnect
  • Load calculation, if the upgrade is for an EV charger or suite
  • Drywall patching and clean-up
  • The contractor's City business licence
  • GST on its own line

Electrical terms on an Edmonton quote

Service upsize
Raising the amperage the home can draw from the grid, for example from 100 to 200 amps. A panel swap without an upsize replaces the box and breakers but keeps the same service. [1]
Load manager
A device that limits an EV charger when the rest of the house is using a lot of power, so the charger fits within the existing service. [5]
Single-line drawing
A simple diagram of the electrical service. Edmonton asks for one with the permit for service upgrades of 400 amps or more. [8]

Edmonton panel upgrade questions

How much is a 100 to 200 amp upgrade in Edmonton?

A standard Edmonton panel upgrade costs $2,200 to $6,500 by one local electrician's figures, and one installer quotes $1,500 to $3,000 when the upgrade goes in with an EV charger. A full overhead service upgrade with a new mast and meter base is priced separately by the same electrician and starts at the top of that range.

Can I add new outlets in my Edmonton basement myself?

Only if you own and live in a single-family house and get a homeowner permit first, since new circuits for outlets or lighting need one. A local electrician quotes $2,000 to $5,000 for basement rough-in wiring, depending on the size of the space.

How much do pot lights cost to install in Edmonton?

An Edmonton electrician quotes $80 to $150 per pot light, depending on attic access and whether drywall has to be cut and patched. Ask whether drywall repair and painting are in the price.

What is the minimum charge for an electrician in Edmonton?

One Edmonton electrician charges a minimum service call of $330 plus GST, covering three hours of one journeyman with the van and travel included. Its after-hours emergency call is $495 plus GST for the first three hours.

Do Edmonton panel upgrade prices include GST?

Most Edmonton panel prices in this guide do not say either way, so assume GST may be extra. Alberta has no provincial sales tax, and the 5% GST should appear as its own line on a written quote so you can compare like with like.

Sources

  1. Electrical Panel Upgrade Edmonton, 100A to 200A, Raydn Renewables (Edmonton electrical and solar contractor). Checked 2026-10-29.
  2. Panel Upgrade Edmonton, VA Electric Contracting & Maintenance Ltd. (Edmonton electrical contractor). Checked 2026-10-29.
  3. Electrical Panel Price Estimator, The Gentlemen Pros (Calgary, Edmonton and Red Deer plumbing, HVAC and electrical company). Checked 2026-10-29.
  4. EV Charger Installation Cost in Edmonton 2026: Real Pricing, Stellar Upgrades (Edmonton installer). Published 2026-05-03. Checked 2026-10-29.
  5. EV Charger Installation Edmonton, Raydn Renewables (Edmonton electrical and solar contractor). Checked 2026-10-29.
  6. Residential Electrician Edmonton, Voltura Electrical Services (Edmonton electrical contractor). Checked 2026-10-29.
  7. Aluminum Wiring and Knob-and-Tube Replacement Edmonton, MNR Electric (Edmonton electrical contractor). Published 2026-10-15. Checked 2026-10-29.
  8. Electrical permit (residential), City of Edmonton. Checked 2026-10-29.
  9. Electrical Permit Application for Homeowners, City of Edmonton. Published 2020-03. Checked 2026-10-28.
  10. EPCOR Power Connection Process, City of Edmonton. Checked 2026-10-28.
  11. What Size Electrical Panel Do I Need In Alberta?, Panel Upgrade Experts (Calgary electrical contractor). Published 2024-10-30. Checked 2026-10-29.

Standard panel upgrade (new panel and breakers, permit and inspection)$2,200 to $6,500

Get a quote