CostGuide.ca

What home projects cost in Alberta

For contractors

How much do new eavestroughs cost in Calgary?

New eavestroughs on a typical 2,000 sq ft Calgary home cost $1,500 to $2,800 in heavier 0.032 aluminum, and the same gauge is quoted at $10 to $14 per linear foot installed. Standard 0.027 aluminum costs a little less and copper far more. Length of run, metal, gauge, downspouts and access set your price.

By the CostGuide.ca editorial team. Published 28 October 2026. Prices checked October 2026 against 12 sources.

Get a quote from a local eavestrough contractor

How much does each type of eavestrough cost in Calgary?

Aluminum is the usual choice in Calgary at $8 to $11 per linear foot in standard 0.027 gauge, galvanized steel costs $12 to $18, and copper is the most expensive at $25 to $45.

Calgary eavestrough prices per linear foot

Low to high range

JobLowHigh
One-piece aluminum eavestrough, standard 0.027 gauge, installed$8 to $11per linear ft. Formed on site in one length per run $8 $11
One-piece aluminum eavestrough, heavier 0.032 gauge, installed$10 to $14per linear ft $10 $14
One-piece aluminum eavestrough, premium 0.040 gauge, installed$13 to $17per linear ft. Rare on homes $13 $17
Galvanized steel eavestrough (sectional), installed$12 to $18per linear ft. Sectional, not one-piece $12 $18
Galvalume (zinc-aluminum coated steel) eavestrough, installed$14 to $20per linear ft $14 $20
Copper eavestrough, installed$25 to $45per linear ft. Covers 16 oz and 20 oz copper $25 $45
Vinyl or PVC eavestrough$3 to $6per linear ft. The big-box product, listed in the source's installed per foot table $3 $6

Prices in CAD as local contractors publish them. Most do not say whether 5% GST is included, so ask for GST as its own line. Alberta has no PST. Checked October 2026.

The per foot prices above come from a Calgary roofer's 2026 eavestrough price guide, which splits aluminum into three gauges instead of giving one blended figure. A companion guide from the same roofer, dated September 2026, supplies the gutter guard, ice dam and lifespan figures further down. Treat them as one local contractor's view and get two or three quotes of your own.

Calgary is hard on a roofline. Chinook freeze and thaw cycles and summer hail shorten the working life of an eavestrough, a local roofer reports, so the gauge you choose matters more here than in milder cities. If the soffit and fascia are also tired, pricing all three jobs together usually brings the total down.

Want a real number for your eavestroughs?

What do you need?

What will eavestroughs cost for my Calgary home?

Pick a metal and enter the total length of eavestrough around your home. A Calgary roofer quotes standard aluminum at $8 to $11 per linear foot installed.

Enter your length of eavestrough in linear ft.

Uses one Calgary roofer's installed per foot rates. A 2,000 sq ft Calgary home usually has 150 to 200 feet of run. Removal, downspout upgrades and drains are extra. A guide only, not a quote.

How much do eavestroughs cost for a whole Calgary house?

A typical 2,000 sq ft Calgary home with 150 to 200 feet of run costs $1,200 to $2,200 in standard aluminum and $1,500 to $2,800 in the heavier 0.032 gauge, with copper at $4,500 to $9,000.

Calgary eavestrough totals for a 2,000 sq ft home

Low to high range

JobLowHigh
Whole house, standard 0.027 aluminum (2,000 sq ft home, 150 to 200 ft of run)$1,200 to $2,200per home $1,200 $2,200
Whole house, heavier 0.032 aluminum (2,000 sq ft home, 150 to 200 ft of run)$1,500 to $2,800per home $1,500 $2,800
Whole house, aluminum with premium downspouts and extra outlets$1,800 to $3,200per home $1,800 $3,200
Whole house, galvanized steel eavestrough (2,000 sq ft home)$2,000 to $3,600per home $2,000 $3,600
Whole house, copper eavestrough (2,000 sq ft home)$4,500 to $9,000per home $4,500 $9,000

Prices in CAD as local contractors publish them. Most do not say whether 5% GST is included, so ask for GST as its own line. Alberta has no PST. Checked October 2026.

What extras can show up on a Calgary eavestrough quote?

Taking the old run down adds $1 to $3 per linear foot, and gutter guards fitted at install are the largest per foot add-on at $8 to $15.

Calgary eavestrough add-ons

Low to high range

JobLowHigh
Remove old eavestroughs$1 to $3per linear ft. Removal and disposal of the old run $1 $3
Upgrade from 0.027 to 0.032 aluminum$0.50 to $1.00per linear ft. Added to the 0.027 price $0.50 $1.00
Upgrade from 5 inch to 6 inch eavestrough$1.50 to $3.00per linear ft. About 40% more capacity $1.50 $3.00
Upgrade downspouts from 2x3 to 3x4 inch$5 to $10per downspout $5 $10
Splash block or buried drain beyond the basic downspout$50 to $300per downspout. Buried connections cost more $50 $300
Custom or special-order colour$1 to $3per linear ft $1 $3
Gutter guards added at install$8 to $15per linear ft. When specified at install $8 $15
Quality micromesh gutter guard system$1,500 to $3,500per home. Whole system for a home with heavy tree cover or risky ladder access; the source gives no house size or run length $1,500 $3,500
Heat cable pre-wire at known ice dam spots, at install$200 to $500per job. Pre-wire only, at known ice dam spots $200 $500
Ice dam repair$1,500 to $3,500per job. Scope not broken down by the source $1,500 $3,500

Prices in CAD as local contractors publish them. Most do not say whether 5% GST is included, so ask for GST as its own line. Alberta has no PST. Checked October 2026.

How much do soffit and fascia add in Calgary?

Capping the existing soffit and fascia in aluminum costs $8 to $15 per linear foot in Calgary, and rotten fascia found when the old eavestroughs come off adds $150 to $1,500 depending on how far it goes.

Calgary soffit and fascia prices

Low to high range

JobLowHigh
Aluminum soffit and fascia cap-over$8 to $15per linear ft. New aluminum over the existing wood $8 $15
Soffit and fascia aluminum cap-over, bungalow (140 to 180 linear ft)$1,800 to $2,700per home $1,800 $2,700
Soffit and fascia replacement, standard two-storey$4,500 to $8,000per home. A second Calgary roofer's estimated 2026 range $4,500 $8,000
Fascia rot repair found during eavestrough tear-off$150 to $1,500per job. Depends how far the rot goes $150 $1,500

Prices in CAD as local contractors publish them. Most do not say whether 5% GST is included, so ask for GST as its own line. Alberta has no PST. Checked October 2026.

What drives the cost of eavestroughs in Calgary?

The metal and its gauge, the length of run, how many downspouts you need and how hard the roofline is to reach explain most of the gap between two Calgary quotes.

  • Metal and gauge. Standard 0.027 aluminum is the base residential product. Moving up to 0.032 adds $0.50 to $1.00 per foot, and a Calgary roofer reports that 25 mm hail leaves visible dents in 0.027 while 0.032 resists most storms. [1]
  • Eavestrough size. A 6 inch eavestrough carries about 40% more water than a 5 inch one and costs $1.50 to $3.00 more per foot, according to the same roofer's guide. [2]
  • Downspouts. Plan on one downspout for every 600 to 800 sq ft of roof that drains toward it, a Calgary roofer advises, and choose 3 by 4 inch downspouts over the 2 by 3 inch national default. The larger size moves roughly 75% more water and costs $5 to $10 more per downspout. [8] [1]
  • Access and hidden costs. Expect 10% to 30% more for a roofline that is hard to reach. Hidden costs, such as rotten fascia found behind the old run, can add 20% to 40% to the headline quote, the roofer warns. [1]
  • Colour. Custom or special-order colours add $1 to $3 per foot over the standard range. [1]
  • Hanger spacing. Closer hangers mean more parts and labour. A Calgary roofer treats 24 inch spacing as the local baseline, tighter than the 32 to 36 inches common in national guides. [2]

Should you repair or replace eavestroughs in Calgary?

Repair a short section on a younger system, but replace the whole run once more than about 30% of it needs work, a Calgary roofer advises.

Repair

A loose hanger, one leaking corner or a short damaged length on a system with years left. None of the Calgary sources we checked publish current eavestrough repair prices, so ask for a written price before any work starts. [2]

Replace

Several sag points, joints pulling apart along the run, or a system already 20 to 25 years old call for replacement. Once more than 30% of the run needs work, a new system is usually cheaper over time. [2]

How long each metal lasts

Aluminum lasts about 20 to 30 years, steel 15 to 25 years in this climate and copper more than 50. Chinook freeze and thaw cycles and hail shorten eavestrough life by roughly 15% to 20% compared with milder climates, a Calgary roofer reports. [2]

Do heat cables stop ice dams on Calgary eavestroughs?

Heat cables help where ice keeps building up, but the Insurance Bureau of Canada lists them alongside clear eavestroughs, good attic insulation and ventilation, and raking snow off the roof, so they are one part of the fix.

  • Pre-wire at install. Running power for heat cables at known ice dam spots costs $200 to $500 when it is done with new eavestroughs, a Calgary roofer reports. No Calgary source we checked publishes a price for adding heat cable to an existing run. [1]
  • Repair after an ice dam. A Calgary ice dam repair typically costs $1,500 to $3,500, a local roofer says. The roof repair guide covers the shingle and attic side of the damage. [2]
  • Why they form. Ice dams form when snow melts, runs down the roof and refreezes in cold eavestroughs or eaves, the Insurance Bureau of Canada explains (as at January 2026). [12]

How can you save on eavestroughs in Calgary?

Get the material, gauge and downspout count as separate lines, bundle soffit and fascia into the same visit, and keep the run clean so it lasts its full life.

  1. Compare like with like. Ask for the material, gauge and downspout count as separate lines on each estimate. A quote well under $8 a foot may be vinyl offered as a budget option, a Calgary roofer warns, so confirm the metal before you compare. [1]
  2. Bundle the roofline. Doing soffit and fascia with the eavestroughs typically saves 15% to 25%, one Calgary roofer reports. A second puts the labour saving at 15 to 20%. [3] [4]
  3. Keep them clean. Clean at least twice a year, in spring after the blossom drop and in fall before the first snow, and 3 to 4 times a year on a lot with mature trees, the roofer's guide advises. [2]

What rules apply to eavestroughs and downspouts in Calgary?

In Calgary, downspouts have to end at least 2 metres from sidewalks, lanes and drainage facilities under the Stormwater Bylaw, the eavestrough work itself needs no permit, and your contractor needs a City business licence.

How far from the sidewalk must a downspout end in Calgary?

At least 2 metres (6.6 feet). The City's Stormwater Bylaw requires downspouts to end at least that far from any sidewalk, road, pathway, alley, lane or surface drainage facility (as at October 2026). The City asks you to point downspouts toward the front or back of the lot so water drains to the lane or street, which stops ice forming on sidewalks and lanes in winter. Its bylaw page notes an exception for downspouts in a side yard, so call 311 if yours sit there. [5] [6]

What are the fines for breaking Calgary's storm drain rules?

Fines range from $75 to $3,000 for a first offence, according to the City of Calgary's page on storm drain bylaws (as at October 2026). The same page says downspouts and eavestroughs must not end within 2 metres of a surface drainage facility, so check where each extension will finish before the new run goes up. [6]

How far should eavestrough extensions carry water from a Calgary house?

At least 1.2 to 1.8 metres (4 to 6 feet), the City of Calgary advises in its climate ready guidance for roofs. The City also says never to connect extensions to the sanitary sewer line or weeping tile. A Calgary roofer treats 1.8 metres (6 feet) as the minimum for every extension, with the ground sloping away from the house. [7] [8]

Do you need a permit to replace eavestroughs in Calgary?

No. The City of Calgary says most repair or replacement of eavestroughs or downspouts needs no development or building permit (as at October 2026). A Calgary roofer reports that like-for-like replacement of soffit and fascia is generally treated the same way, as standard maintenance. [9] [10]

Does an eavestrough contractor need a licence in Calgary?

Yes. Contractors need a valid City of Calgary business licence, and the City suggests calling 311 to confirm one before you hire (as at October 2026). A contractor who sells to you at your home and takes money before the work is finished also needs an Alberta prepaid contracting licence. [9] [11]

Does hail damage eavestroughs in Calgary?

Often. Local roofers report that hailstones 25 mm or larger dent aluminum eavestroughs, and 40 mm stones can knock a run off its hangers. Local roofers also report that eavestroughs are usually covered under the same home policy as the roof, with the same deductible, so check your own policy. If the shingles were hit too, see the hail damage roof guide. [2]

What should a Calgary eavestrough quote include?

A Calgary eavestrough quote should list the metal, gauge and size, the total linear feet, the number and size of downspouts, removal of the old run, where each extension will end, and GST, so quotes can be compared line by line.

  • Metal and gauge, for example 0.027 or 0.032 aluminum
  • Eavestrough size (5 or 6 inch) and the total linear feet
  • Number of downspouts and their size (2 by 3 or 3 by 4 inch)
  • Hanger type and spacing
  • Removal and disposal of the old eavestroughs
  • Where each downspout extension will end, at least 2 metres from sidewalks and lanes
  • How any rotten fascia will be priced if it is found
  • Gutter guards or heat cable pre-wire as separate lines, if you want them
  • Proof of a current City of Calgary business licence
  • GST as its own line

Eavestrough terms on a Calgary quote

Gauge
The thickness of the aluminum. 0.027 is the standard residential gauge, and 0.032 is heavier and stands up better to hail, a Calgary roofer reports. [1]
One-piece (continuous) eavestrough
Aluminum eavestrough rolled out on site to the length of each run instead of being joined from short pieces. Galvanized steel is usually sectional. [1]
Hanger
The bracket that holds the eavestrough to the fascia board. Spacing is measured in inches between hangers, and a Calgary roofer uses 24 inches as the local baseline. [2]

Calgary eavestroughs questions

Is copper eavestrough worth it in Calgary?

Only if you plan to stay for decades. Copper costs $25 to $45 per linear foot against $10 to $14 for heavier aluminum, a Calgary roofer reports, but it can last more than 50 years where aluminum lasts about 20 to 30. Aluminum remains the standard residential choice.

Should I get 5 inch or 6 inch eavestroughs in Calgary?

Six inch is worth pricing on a large roof or one that sends a lot of water to a few corners. It carries about 40% more water than 5 inch and costs $1.50 to $3.00 more per foot, a Calgary roofer reports, so ask for both sizes on the same quote.

Are gutter guards worth it in Calgary?

It depends how much debris lands in your eavestroughs. Guards added at install cost $8 to $15 per linear foot, and a Calgary roofer says a quality micromesh system at $1,500 to $3,500 earns its keep on a home with heavy tree cover or risky ladder access. Without guards, plan to clean 3 to 4 times a year under mature trees.

Are vinyl eavestroughs a good choice in Calgary?

They are the cheapest option but not the usual one. Vinyl or PVC costs $3 to $6 per linear foot as a big-box product, a Calgary roofer reports, against $8 to $11 for standard aluminum installed. If a contractor's quote looks very cheap, ask whether it is vinyl.

Do new eavestroughs come with downspouts?

Whole-house prices normally include standard downspouts, but not upgrades. A Calgary roofer's total rises to $1,800 to $3,200 with premium downspouts and extra outlets, and splash blocks or buried drains add $50 to $300 per downspout.

Sources

  1. Eavestrough Cost in Calgary: Aluminum, Steel, Copper Pricing Guide, Superior Roofing Ltd (Calgary roofing contractor). Checked 2026-10-29.
  2. Calgary Eavestroughs & Gutters: Complete Homeowner's Guide, Superior Roofing Ltd (Calgary roofing contractor). Published 2026-09-29. Checked 2026-10-29.
  3. Cost of Soffit and Fascia Work in Calgary, Superior Roofing Ltd (Calgary roofing contractor). Published 2026-09-26. Checked 2026-10-29.
  4. Soffit and Fascia Replacement in Calgary: A Complete Guide, Sunwest Roofing (Calgary roofing and exteriors contractor). Published 2026-07-15. Checked 2026-10-29.
  5. Drainage information for homeowners, City of Calgary. Checked 2026-10-29.
  6. Bylaws related to the storm drains, City of Calgary. Checked 2026-10-29.
  7. Climate ready measures: roofs, City of Calgary. Checked 2026-10-29.
  8. Downspout Sizing and Drainage for Calgary Yards, Superior Roofing Ltd (Calgary roofing contractor). Published 2026-09-29. Checked 2026-10-29.
  9. What to do about damage from storms, City of Calgary. Checked 2026-10-28.
  10. Calgary Soffit & Fascia: Complete Homeowner's Guide, Superior Roofing Ltd (Calgary roofing contractor). Published 2026-09-26. Checked 2026-10-29.
  11. Prepaid contracting licence, Government of Alberta. Checked 2026-10-28.
  12. Stay protected: understanding and helping prevent ice dams, Insurance Bureau of Canada. Published 2026-01-30. Checked 2026-10-29.

Whole house, heavier 0.032 aluminum (2,000 sq ft home, 150 to 200 ft of run)$1,500 to $2,800

Get a quote