CostGuide.ca

What home projects cost in Alberta

For contractors

How much does a panel upgrade cost in Calgary?

An electrical panel upgrade from 60 or 100 amp to 200 amp in Calgary costs $2,500 to $5,000 plus GST, according to one local electrician, with the City permit and ENMAX coordination included. A 200 amp upgrade on an underground service runs $7,000 to $10,000. Whether your service comes in overhead or buried moves the price most.

By the CostGuide.ca editorial team. Published 28 October 2026. Prices checked October 2026 against 15 sources.

Get a quote from a local electrician

How much does each panel and service upgrade cost in Calgary?

Swapping a panel without adding capacity is the cheapest panel job in Calgary at $2,000 to $4,000, an overhead 200 amp service upgrade runs $4,000 to $6,000, and a buried service is the most expensive at $7,000 to $10,000.

Calgary panel and service upgrade prices

Low to high range

JobLowHigh
Panel upgrade, 60 or 100 amp to 200 amp$2,500 to $5,000per job. Plus GST, the source says. Includes the City permit and ENMAX coordination. The higher end applies when the service entrance wiring also needs replacing $2,500 $5,000
Panel upgrade, 60 amp fuse panel to a new 100 amp breaker panel$2,000 to $3,500per job. Plus GST, the source says $2,000 $3,500
Panel replacement, same service size$2,000 to $4,000per job. Can run higher $2,000 $4,000
100 amp panel replacement$3,000 to $3,500per job. Panel, breakers, labour, City permit and inspection, plus a new mast and meter base if needed $3,000 $3,500
200 amp service upgrade, overhead service$4,000 to $6,000per job. New panel, service entrance cable, mast and meter base, permit and ENMAX coordination $4,000 $6,000
200 amp service upgrade, underground service$7,000 to $10,000per job. Includes new underground conductor to the property line. Any ENMAX civil work is extra $7,000 $10,000
Service upgrade, 100 amp to 200 amp$4,000 to $8,000per job. Can run higher $4,000 $8,000
Panel upgrade, essential base installation$2,800 to $3,304per job. Planning range for Calgary, Edmonton and Red Deer. Permits, code work and access can change the final price $2,800 $3,304
Panel upgrade, larger or future-ready installation$6,200 to $7,316per job. Planning range for Calgary, Edmonton and Red Deer $6,200 $7,316

Prices in CAD as local contractors publish them. Most do not say whether 5% GST is included, so ask for GST as its own line. Alberta has no PST. Checked October 2026.

The ranges above come from four contractors' published price guides: three Calgary firms and one company working across Calgary, Edmonton and Red Deer. Some quote the panel alone and some quote the whole service, so read the job name on each row before you compare a quote against it. A panel replacement keeps the same amperage; a service upgrade raises it, which means new service cable, often a new mast and meter base, and an ENMAX disconnect and reconnect.

Calgary contractors name the usual triggers as a new Level 2 EV charger, central air, a hot tub, solar or a basement suite, or an insurer asking for an older panel to go. This guide prices those jobs, plus the City permit rules and what ENMAX pays for.

Want a real number for your electrical panel?

What do you need?

What extras can add to a Calgary panel upgrade?

A new service mast and grounding brings a Calgary panel upgrade to $2,800 to $3,800, and in the rare case ENMAX has to upgrade the transformer, that adds $1,500 to $5,000 on top.

Calgary panel upgrade extras and add-ons

Low to high range

JobLowHigh
Panel upgrade with a new service mast and grounding$2,800 to $3,800per job $2,800 $3,800
Panel upgrade with a full service entrance rebuild (older homes)$3,500 to $4,500per job $3,500 $4,500
Utility company portion of a service upgrade (ENMAX or FortisAlberta)$1,000 to $10,000per job. Can run higher $1,000 $10,000
ENMAX transformer upgrade$1,500 to $5,000per job. Added on top of the upgrade. The source labels it rare $1,500 $5,000
Sub-panel installation$800 to $2,500per job. Can run higher $800 $2,500
Electrical interlock or load management system$800 to $2,500per job. Can run higher $800 $2,500

Prices in CAD as local contractors publish them. Most do not say whether 5% GST is included, so ask for GST as its own line. Alberta has no PST. Checked October 2026.

How much does it cost to rewire an older Calgary home?

A Calgary electrician puts a full rewire at $6,000 to $10,000 for a bungalow of about 900 to 1,100 sq ft and $10,000 to $16,000 or more for a larger two-storey home, with a panel and service upgrade adding $3,500 to $5,500 if needed.

Calgary rewiring and knob and tube prices

Low to high range

JobLowHigh
Knob and tube insurance inspection and letter$150 to $350per visit. Letter signed by a master electrician $150 $350
Partial rewire (kitchen and bathrooms)$2,500 to $5,000per job. Depends on circuit count and access $2,500 $5,000
Full rewire, bungalow of about 900 to 1,100 sq ft$6,000 to $10,000per home. Includes the City permit and inspection $6,000 $10,000
Full rewire, two-storey or 1,400 sq ft plus home$10,000 to $16,000per home. Can run higher $10,000 $16,000
200 amp panel and service upgrade added to a rewire$3,500 to $5,500per job. On top of the rewire price $3,500 $5,500

Prices in CAD as local contractors publish them. Most do not say whether 5% GST is included, so ask for GST as its own line. Alberta has no PST. Checked October 2026.

What do EV chargers and hourly electrical work cost in Calgary?

A Level 2 EV charger costs $1,500 to $2,500 installed with the charger in Calgary, and Calgary electricians' hourly rates run $90 to $130 for smaller jobs, by local contractors' figures.

Calgary EV charger and electrician rates

Low to high range

JobLowHigh
Level 2 EV charger installed, charger included$1,500 to $2,500per job $1,500 $2,500
Level 2 EV charger installation, charger not included$1,500 to $2,500per job. Plus GST, the source says. Permit included $1,500 $2,500
EV energy management system (EVEMS) installation$1,200 to $3,000per job. Can run higher $1,200 $3,000
Licensed electrician$90 to $130per hour $90 $130
Master electrician$100 to $140per hour. Can run higher $100 $140

Prices in CAD as local contractors publish them. Most do not say whether 5% GST is included, so ask for GST as its own line. Alberta has no PST. Checked October 2026.

What drives the cost of a panel upgrade in Calgary?

The type of service coming into the house, the state of the mast, meter base and grounding, and how much ENMAX has to do make most of the difference between two Calgary quotes.

  • Overhead or underground service. This is the biggest swing. A Calgary contractor prices an overhead 200 amp upgrade at $4,000 to $6,000 and an underground one at $7,000 to $10,000, because a buried service needs new conductor run to the property line. It notes underground service is common in newer neighbourhoods and infills. [3] [15]
  • Service entrance wiring. One Calgary electrician says the top of its range applies when the service entrance wiring also has to be replaced, not just the panel. [1]
  • Mast, meter base and grounding. Older homes often need a new mast, a new meter base or grounding brought up to current code. A mast and grounding job runs $2,800 to $3,800 and a full service entrance rebuild $3,500 to $4,500, one Calgary installer reports. [6] [2]
  • Panel location. A panel in a hard to reach spot takes longer to work on, and a Calgary electrician notes that this adds labour. [2]
  • The utility's share. One Calgary contractor lists the utility company's portion of a service upgrade at $1,000 to $10,000 or more. It does not say when that applies. ENMAX itself says upgrades to above-ground supply wires should be covered by ENMAX apart from a disconnect and reconnect fee, while upgrading buried wires on your property is the homeowner's cost, so ask which kind of service you have. [4] [14]
  • What the price includes. Some figures include the permit and ENMAX coordination, one leaves any ENMAX civil work on an underground service out, and one notes that permits and code work can change its planning range. Ask each electrician to say what is in and out. [1] [3] [5]

Does a Calgary home need a 100 or 200 amp panel?

Calgary electricians describe 200 amp as the current standard for most homes and the size to plan for if you are adding an EV charger, solar or a heat pump.

60 amp

Found in older Calgary homes built before the 1970s. A local contractor says most Calgary insurers want it upgraded. Moving to a new 100 amp breaker panel costs $2,000 to $3,500 plus GST, by one electrician's figures. [4] [1]

100 amp

The smallest residential service the Canadian Electrical Code allows, a Calgary contractor notes. Whether it is enough depends on what you add, and the same contractor lists an EV charger, air conditioning and a suite among the common reasons to move up. [4]

200 amp

The current standard for most Calgary homes. A local contractor recommends it if you are planning solar panels, a heat pump or an EV charger. [4]

When should you upgrade your electrical panel in Calgary?

A Calgary contractor lists frequent tripping, a panel over 25 years old, a new large load or an insurer's request as the usual reasons to upgrade.

  • The panel is old or trips often. Frequent tripping or a panel more than 25 years old are the first signs a Calgary contractor looks for. [4]
  • You are adding a big load. An EV charger, central air conditioning, a hot tub or sauna, solar panels or a basement suite can all need more capacity than an older service has. [4]
  • Your insurer asks. Calgary electricians report that some insurers are becoming more cautious about older 100 amp panels, and that Federal Pacific, Zinsco and fuse panels are a common reason to replace. [1] [3]
  • There may be a cheaper fix. If the only new load is an EV charger, an EV energy management system at $1,200 to $3,000 can sometimes avoid a service upgrade. ENMAX lists it as an option when a panel is short on capacity. [2] [14]

How long does a panel upgrade take in Calgary?

Most Calgary panel upgrades take one working day on site, but ENMAX scheduling can add 1 to 3 days to the overall timeline.

  1. Load calculation and quote. The electrician works out what your home draws now and what you plan to add. Under City rules a homeowner cannot do this calculation themselves. [12]
  2. Permit and ENMAX booking. The contractor takes out the electrical permit and books the ENMAX disconnect and reconnect. A Calgary installer says that scheduling can add 1 to 3 days. [12] [6]
  3. Install day. Power is off while the work is done. One Calgary contractor estimates 6 to 8 hours of labour for a 100 amp panel, 8 to 12 hours for an overhead 200 amp upgrade and 10 to 12 hours for underground, and most jobs finish within one working day. [3]
  4. Inspection. A City inspection is part of every panel upgrade in Calgary, one local electrician says, before the power is restored. [1]

What permits and rules apply to electrical work in Calgary?

In Calgary, all new wiring needs an electrical permit, only an electrical contractor can work on the main service or wire an EV charger, and ENMAX decides who pays for the utility side of a service upgrade.

Do you need a permit to upgrade an electrical panel in Calgary?

Yes. The City of Calgary requires an electrical permit for all new wiring installations, and a homeowner permit does not cover work on the main service, panel, main breaker or meter base (as at October 2026). A permit is not needed when you only replace fixtures. Electrical contractors must take out their own permit and cannot work under a homeowner's permit. [11] [12]

What electrical work can a Calgary homeowner do with their own permit?

Some, if you own the home, live in it, it is not a rental and you do the work yourself. You can tie into the main panel without changing it, or add a sub-panel where there is an existing main breaker (as at October 2026). A homeowner permit does not cover the main service, EV charger wiring, EV energy management or load management systems, air conditioner wiring, solar, batteries, in-ground pools or hot tubs, or load calculations. The City also will not issue a homeowner permit for wiring already concealed without a permit. [12] [11]

How much is an electrical permit in Calgary?

Under the City's 2026 fee schedule, a homeowner electrical permit costs $116.50, made up of a $112 fee and a $4.50 Safety Codes Council levy (as at October 2026). A contractor's permit is a $112 processing fee plus $9.79 per $1,000 of construction value, plus a 4% Safety Codes Council levy (minimum $4.50, maximum $560). The minimum total is also $116.50. [13] [12]

Does ENMAX pay for a service upgrade?

Partly. ENMAX says upgrades to an above-ground service should be covered by ENMAX, though you are charged a disconnect and reconnect fee. Upgrading buried wires on your property is the homeowner's cost and can be expensive (as at October 2026). The ENMAX page does not publish the fee amount. The City asks homeowners to have their contractor contact ENMAX when the main service has to increase. [14] [12]

Do Calgary rowhouses and condos have extra rules?

Yes. Adding a Level 2 charger, heat pump, air conditioner, hot tub or battery in a Calgary rowhouse or condo needs a load calculation by a professional electrician or engineer, and the condo board or homeowners association must be aware of the extra load (as at October 2026). Homeowners in apartment-style condos cannot pull homeowner permits at all, and in row-type buildings a homeowner permit only covers the unit the owner lives in. [11] [12]

Will an old panel affect home insurance in Calgary?

It can, local electricians report. One Calgary contractor says many Calgary insurers want at least 100 amp service and will not cover homes with Federal Pacific or Zinsco panels, fuse boxes or panels under 60 amps. These are contractor reports, not insurer statements. Ask your own insurer what it requires before you book the work. [3]

What should a Calgary panel upgrade quote include?

A Calgary panel upgrade quote should name the new panel and amperage, say whether the mast, meter base and grounding are included, cover the permit, ENMAX coordination and inspection, and show GST as its own line.

  • The new panel make, amperage and number of breaker spaces
  • Whether it is a panel swap or a service upgrade
  • Overhead or underground service, and who pays for the utility side
  • Mast, meter base, service cable and grounding work, each named
  • The load calculation the sizing is based on
  • City electrical permit and inspection, and who arranges them
  • ENMAX disconnect and reconnect, and the expected power-off time
  • Any sub-panel, surge protection or EV circuit added at the same time
  • Drywall patching where walls are opened
  • GST on its own line

Electrical terms on a Calgary quote

Service upgrade
Raising the amperage that comes into the house, for example from 100 to 200 amps. It usually means a new panel, new service cable and often a new mast and meter base, plus an ENMAX disconnect and reconnect. [3] [12]
Mast and meter base
The mast is the pipe on an overhead service that carries the wires from the utility line down to the house; the meter base is the housing the power meter plugs into. Both are often replaced on older Calgary homes. [3] [6]
Load calculation
A calculation of how much power the home can draw against what the service can supply. In Calgary it has to be done by a qualified electrician, not the homeowner. [12]

Calgary panel upgrade questions

How much does it cost to go from 100 to 200 amp in Calgary?

One Calgary electrician quotes $2,500 to $5,000 plus GST for going from 60 or 100 amp to 200 amp, with the permit and ENMAX work included. Another lists $4,000 to $6,000 on an overhead service and $7,000 to $10,000 where the service is buried, so ask which you have.

Can I replace my own electrical panel in Calgary?

No. A Calgary homeowner permit does not let you install, alter or change the main panel, main breaker or meter base, and the load calculation must come from a qualified electrician. You can add a sub-panel to an existing main service under your own permit if it has a main breaker.

How much does a sub-panel cost in Calgary?

A Calgary electrician lists sub-panel installation at $800 to $2,500 or more. A sub-panel adds breaker spaces for a garage, suite or workshop, but it does not add capacity, so a load calculation should come first if you are adding something large.

Is knob and tube wiring common in Calgary?

It can turn up in older inner-city homes. A Calgary electrician says it was used from about the 1880s to the late 1940s and is worth checking for in homes built before about 1950, naming areas such as Inglewood, Ramsay, Hillhurst, Sunnyside and Mount Royal. An inspection letter costs $150 to $350.

Do Calgary electricians charge GST on panel upgrades?

Yes, GST applies, but most Calgary price guides do not say whether their figures include it. One electrician states its panel prices are plus GST. Alberta has no provincial sales tax, so ask for the 5% GST as its own line on each quote.

Sources

  1. 100 Amp vs 200 Amp Panel: Calgary Homeowner's Guide, Ampt Over Electric (Calgary electrical contractor). Published 2026-02-24. Checked 2026-10-29.
  2. Cost to Replace or Upgrade an Electrical Panel in Calgary: What to Expect, FuseSmart Electric (Calgary electrical contractor). Checked 2026-10-29.
  3. Electrical Panel Upgrades Calgary, Panel Upgrade Experts (Calgary electrical contractor). Published 2026-08-02. Checked 2026-10-29.
  4. What Size Electrical Panel Do I Need In Alberta?, Panel Upgrade Experts (Calgary electrical contractor). Published 2024-10-30. Checked 2026-10-29.
  5. Electrical Panel Price Estimator, The Gentlemen Pros (Calgary, Edmonton and Red Deer plumbing, HVAC and electrical company). Checked 2026-10-29.
  6. 200A Panel Upgrade Calgary, EV Charger Pros (Calgary EV charger installer). Published 2026-04-29. Checked 2026-10-29.
  7. Knob and Tube Wiring in Calgary: Safety, Insurance & Costs, Shock Stop Inc. (Calgary electrical contractor). Published 2026-07-02. Checked 2026-10-29.
  8. What Does it Cost to Install an EV Charger?, Celtex Electric & Automation (Calgary electrical contractor). Published 2025-05-25. Checked 2026-10-29.
  9. Level 2 EV Charger Canada: Calgary Homeowner Guide, Ampt Over Electric (Calgary electrical contractor). Published 2026-09-23. Checked 2026-10-29.
  10. Electrician Hourly Rates in Calgary (2026), Illuminate Solar & Electrical (Calgary electrical contractor). Published 2026-01-10. Checked 2026-10-29.
  11. Trades permits (homeowner electrical and plumbing permits), City of Calgary. Checked 2026-10-28.
  12. Homeowner trades permits, City of Calgary. Checked 2026-10-29.
  13. 2026 Building and Trade Permit Fee Schedule (R2026-02), City of Calgary. Published 2026. Checked 2026-10-29.
  14. Installing an EV charger, ENMAX. Checked 2026-10-29.
  15. 100 Amp Vs 200 Amp Panel: Which Does Your Calgary Home Need?, Panel Upgrade Experts (Calgary electrical contractor). Published 2026-08-06. Checked 2026-10-28.

Panel upgrade, 60 or 100 amp to 200 amp$2,500 to $5,000

Get a quote