How much does insulation cost in Edmonton?
Blown-in fibreglass attic insulation in Edmonton costs $1.50 to $3.50 per square foot, and blown cellulose $1.75 to $4.00, according to a local installer. In province-wide figures, a 1,500 sq ft attic runs $3,000 to $8,250. Attic size, the depth you aim for and whether old insulation comes out set the price.
By the CostGuide.ca editorial team. Published 29 October 2026. Prices checked October 2026 against 18 sources.
Get a quote from a local insulation contractor
What does each type of attic insulation cost in Edmonton?
An Edmonton installer prices blown-in fibreglass at $1.50 to $3.50, cellulose at $1.75 to $4.00 and batts at $2 to $5 per square foot, while attic spray foam runs $4 to $6 in Alberta-wide figures.
Edmonton attic insulation prices per square foot
Low to high range
| Job | Low | High |
|---|---|---|
| Attic blown-in fibreglass$1.50 to $3.50per sq ft. Edmonton installer's range | $1.50 | $3.50 |
| Attic blown cellulose$1.75 to $4.00per sq ft. Edmonton installer's range | $1.75 | $4.00 |
| Attic batt insulation$2 to $5per sq ft. Edmonton installer's range | $2 | $5 |
| Attic insulation, fibreglass batts$2 to $3per sq ft. Alberta-wide range | $2 | $3 |
| Attic insulation, spray foam$4 to $6per sq ft. Alberta-wide range; top given as 6 dollars or more | $4 | $6 |
| Attic insulation, all types (top-up or new)$2.00 to $5.50per sq ft of attic. Alberta-wide range from an installer with an Edmonton office | $2.00 | $5.50 |
Prices in CAD as local contractors publish them. Most do not say whether 5% GST is included, so ask for GST as its own line. Alberta has no PST. Checked October 2026.
Fewer Edmonton insulation companies publish their prices than in Calgary. The figures here come from one Edmonton installer's price table and from an installer with offices in Edmonton and Calgary whose ranges cover all of Alberta. Where the two overlap, as with batts, both are shown so you can see the spread.
We found no Edmonton company publishing installed prices for basement walls, rim joists, garages or vermiculite removal. Rather than borrow another city's numbers, this page leaves those jobs unpriced and explains what to ask for instead.
Want a real number for your insulation?
How much does it cost to insulate a whole attic or an older Edmonton home?
Alberta-wide figures put a 1,000 sq ft attic at $2,000 to $5,500, and an Edmonton worked example priced closed-cell spray foam with air sealing for a 1,400 sq ft older home at $6,800 to $8,400.
Edmonton attic and whole-home insulation
Low to high range
| Job | Low | High |
|---|---|---|
| Attic insulation, 1,000 sq ft attic$2,000 to $5,500per attic. Alberta-wide range | $2,000 | $5,500 |
| Attic insulation, 1,500 sq ft attic$3,000 to $8,250per attic. Alberta-wide range | $3,000 | $8,250 |
| Closed-cell spray foam and air sealing, 1,400 sq ft older home with little insulation$6,800 to $8,400per home. Edmonton worked example | $6,800 | $8,400 |
Prices in CAD as local contractors publish them. Most do not say whether 5% GST is included, so ask for GST as its own line. Alberta has no PST. Checked October 2026.
What R value should an Edmonton attic reach?
CEIP will only finance an Edmonton attic that reaches at least R-50 in total (R-28 for flat or cathedral ceilings), and an Edmonton installer says many homeowners there aim for R-50 to R-60.
- CEIP minimum. For Edmonton, Alberta Municipalities sets a final attic level of at least R-50, or R-28 for flat or cathedral ceilings, which is higher than the R-28 rule it uses elsewhere (as at October 2026). [10]
- What installers aim for. An Edmonton installer says the long heating season leads homeowners to commonly target R-50 to R-60. Another says many Edmonton attics benefit from R-38 to R-60, depending on the home's age, attic design, existing material and venting. [1] [11]
- Settled depth. Loose-fill settles over time. An Edmonton installer says it loses effectiveness if the settled depth falls below what the intended R value needs, so the quote should state the settled depth. [9]
- Older framing. The City of Edmonton's energy code guide says the code's energy section applies to existing buildings only to the extent reasonably practical, and that existing framing left unchanged can be reinsulated and made airtight. [12]
What drives attic insulation prices in Edmonton?
An Edmonton installer says attic size, the insulation depth needed and whether old material must come out have the biggest effect, with access and attic layout making smaller changes.
- Size and depth. A bigger attic, or a bigger jump in depth, means more material and more time. A simple top-up usually costs less than a full replacement. [1]
- Removal. Removal adds labour, containment, disposal and cleanup. It is not needed when the existing insulation is dry, clean and evenly spread. [1]
- Inspection over guesswork. The same installer says an attic inspection prices a job more accurately than a flat per square foot estimate, because it checks depth, condition, moisture and access. [1]
- Season. Season alone does not set the price, an Edmonton installer says, so a winter job is not automatically dearer. [13]
What about spray foam, basements and vermiculite in Edmonton?
We found no Edmonton company publishing installed prices for basement, rim joist, garage or vermiculite work, so ask for written quotes after a site visit for those jobs.
Spray foam
The only published figures are Alberta-wide attic rates of $4 to $6 per square foot and one Edmonton example of $6,800 to $8,400 for a 1,400 sq ft older home. [2]
Basements
Natural Resources Canada says basements can account for about 25% of heat loss, advises at least R-12 on the inside of basement walls, and says not to insulate from the inside until moisture problems are fixed. Insulation is usually part of an Edmonton basement development. [14]
Vermiculite
Health Canada says vermiculite may contain asbestos and should not be disturbed or removed yourself. Alberta OHS says employers must notify it at least 72 hours before work that may release asbestos. [15] [16]
Garages
EPCOR says Alberta heating professionals warn that many garages, particularly detached ones, lack proper insulation, and that even the best heater cannot make up for it. [17]
When should you book attic insulation in Edmonton?
An Edmonton installer advises asking for an attic inspection in late summer or early fall if you want the work finished before winter.
- Late summer. Book the inspection so there is time to schedule the work before the cold sets in. [13]
- Compare quotes. Get at least two quotes in writing, and a written contract before work starts, as Natural Resources Canada advises. [18]
- Install day. Most attic jobs take a day, especially batts. Spray foam or removal can take longer. [2]
What should you check before insulating in Edmonton?
In Edmonton, check the CEIP waitlist and its three upgrade rule, whether a City rebate is available, whether your job needs a permit, and that a contractor taking a deposit holds a provincial licence.
Is Edmonton's CEIP taking applications for insulation?
Yes, with limits. The City says the program is nearing capacity, new pre-qualifications go on a first-come, first-served waitlist, and intake pauses after 150 submissions (as at October 2026). Edmonton finances $3,000 to $50,000 at a fixed 6% for up to 20 years, and a home needs at least three upgrades unless fewer reach net zero or the property has used CEIP before. See CEIP in Calgary and Edmonton. [3]
Is there an Edmonton rebate for insulation?
Not from the City right now. Edmonton says its Home Energy Retrofit Accelerator for homes is fully subscribed, and the federal Canada Greener Homes Grant and Loan are both closed (as at October 2026). [3] [4] [5]
Does insulation need a permit in Edmonton?
Check with the City before you start. Edmonton's renovation permit list does not mention insulation, and we found no City page that says either way (as at October 2026). The same list says changing a house's exterior finish material needs a permit, while replacing it with similar material does not. [6]
What do icicles say about an Edmonton attic?
The City of Edmonton says icicles hanging from eavestroughs in winter point to poor attic insulation, or to gutters blocked with debris, and that better attic insulation and venting reduce the risk of ice damming. Its climate resilient home guide (updated December 2024) also warns that a badly vented attic can cause moisture and mould and make insulation less effective. Repair prices are in the Edmonton ice dam cost guide. [7]
Does an Edmonton insulation company need a licence to take a deposit?
Yes, if it sells to you in person away from its own premises and takes money before the work is done. It then needs a prepaid contracting licence from the Government of Alberta. You can check a licence with the Find a Licensed Business search or by calling the Consumer Contact Centre on 780-427-4088. [8]
What should an Edmonton attic insulation quote include?
An Edmonton attic quote should name the material, the target R value and settled depth, the attic area, any removal and air sealing, and GST as its own line.
- Findings from the attic inspection: current depth, condition and any moisture
- Material (blown-in fibreglass, cellulose, batts or spray foam)
- Target R value and the settled depth that reaches it
- Attic area being covered
- Whether old insulation stays, and if not, the removal, containment and disposal cost
- Air sealing and how attic venting will be kept clear
- Whether the job meets CEIP's R-50 rule, if you plan to finance it
- The contractor's prepaid contracting licence number if a deposit is taken
- GST as its own line
Insulation terms on an Edmonton quote
- Blown-in (loose-fill)
- Insulation blown into the attic as loose fibres rather than laid as batts. An Edmonton installer recommends it for top-ups, open attic areas and uneven existing coverage. [1]
- Cellulose
- A blown-in insulation that an Edmonton installer suggests where dense coverage and recycled material matter. It costs $1.75 to $4.00 per square foot from an Edmonton installer. [1]
- Settled depth
- The depth loose-fill insulation ends up at after it settles. Installation specifications set a minimum settled depth so the insulation keeps its rated value. [9]
Edmonton insulation questions
How much does an R-60 attic top-up cost in Edmonton?
No Edmonton installer we found publishes an R-60 top-up price. Blown-in fibreglass costs $1.50 to $3.50 per square foot locally, and an Edmonton installer says a simple top-up usually costs less than a full replacement. Ask for the final settled depth and R value in writing.
Is cellulose or fibreglass better for an Edmonton attic?
Both work. An Edmonton installer suggests blown-in fibreglass, at $1.50 to $3.50 per square foot, for top-ups and uneven coverage, and cellulose, at $1.75 to $4.00, where dense coverage and recycled content matter to you. Compare the R value each quote reaches, not just the price.
Can I get CEIP for attic insulation alone in Edmonton?
Usually not. Edmonton needs at least three upgrades on a home unless fewer get the property to net zero or you have used CEIP there before. Attic insulation can be paired with other upgrades on the CEIP list, such as new windows, to reach three.
How long does an attic insulation job take in Edmonton?
Usually a day once it is booked, especially for batts, an Alberta installer says, with spray foam or removal taking longer. For pre-winter work, an Edmonton installer suggests asking for the inspection in late summer or early fall.
Why is there no Edmonton basement insulation price here?
Because we found no Edmonton company publishing one. We do not copy another city's rates onto an Edmonton page. For basement walls, ask at least two contractors to quote the same R value and method so the prices compare fairly.
Sources
- Cost of Attic Insulation in Edmonton, Stewart Insulation (insulation contractor, offices in Edmonton and Grande Prairie). Checked 2026-10-29.
- How Much Does Attic Insulation Cost in Calgary and Edmonton?, Ideal Insulation (1979) Ltd. (insulation contractor with offices in Calgary and Edmonton). Published 2025-10-19. Checked 2026-10-29.
- Clean Energy Improvement Program, City of Edmonton. Checked 2026-10-29.
- Closed: Canada Greener Homes Grant, Natural Resources Canada. Published 2026-07-20. Checked 2026-10-29.
- Canada Greener Homes Loan, Natural Resources Canada. Published 2026-04-17. Checked 2026-10-29.
- Renovations and Basement Development, City of Edmonton. Checked 2026-10-29.
- Climate Resilient Home Summary Guide, City of Edmonton. Published 2024-12. Checked 2026-10-29.
- Prepaid contracting licence, Government of Alberta. Checked 2026-10-28.
- Blow-In vs Batt Insulation for Attics in Edmonton, Stewart Insulation (insulation contractor, offices in Edmonton and Grande Prairie). Checked 2026-10-29.
- Doors, Windows and Insulation (CEIP residential eligible upgrades), Clean Energy Improvement Program, administered by Alberta Municipalities. Checked 2026-10-29.
- Edmonton Summer Heat Checklist: Attic Insulation Upgrades to Make Before the Next Heat Wave, Ideal Insulation (1979) Ltd. (insulation contractor with offices in Calgary and Edmonton). Published 2026-06-25. Checked 2026-10-29.
- NBC(AE) 9.36 Energy Efficiency Requirements Guide, City of Edmonton. Checked 2026-10-29.
- Best Time of Year to Upgrade Attic Insulation in Edmonton, Stewart Insulation (insulation contractor, offices in Edmonton and Grande Prairie). Checked 2026-10-29.
- Keeping The Heat In, Section 6: Basement insulation: floors, walls and crawl spaces, Natural Resources Canada. Published 2024-12-23. Checked 2026-10-29.
- Health risks of asbestos, Health Canada. Published 2023-02-10. Checked 2026-10-29.
- Submit an asbestos project notification, Government of Alberta (Occupational Health and Safety). Published 2025-11-10. Checked 2026-10-29.
- Choosing the right garage heater in Alberta, EPCOR. Checked 2026-10-29.
- Keeping The Heat In, Section 1: Introduction, Natural Resources Canada. Published 2025-01-14. Checked 2026-10-29.