How much does Poly-B replacement cost in Edmonton?
Replacing Poly-B in a typical Edmonton single family home costs $7,000 to $14,000, according to a local repipe company, and another Edmonton plumber quotes $6,000 to $20,000 for a full home. Condos and townhomes start lower, at $3,500 to $5,000. Square footage, bathroom count and finished basements move the price most.
By the CostGuide.ca editorial team. Published 29 October 2026. Prices checked October 2026 against 9 sources.
Get a quote from a local plumber
What do Edmonton companies charge to repipe Poly-B?
Edmonton repipe quotes run from $3,500 for a small condo to $20,000 or more for a large home, and one local company puts a typical single family home at $7,000 to $14,000.
Edmonton Poly-B repipe prices
Low to high range
| Job | Low | High |
|---|---|---|
| Poly-B repipe, typical single family home$7,000 to $14,000per home. An Edmonton company's guide, which its body calls a 2024 price guide | $7,000 | $14,000 |
| Poly-B repipe, condo or townhome$3,500 to $5,000per home. Same Edmonton guide, labelled a 2024 price guide in its body | $3,500 | $5,000 |
| Poly-B repipe, bungalow 1,200 to 1,500 sq ft$5,500 to $8,500per home. Same Edmonton guide, labelled a 2024 price guide in its body | $5,500 | $8,500 |
| Poly-B repipe, two-storey 2,000 to 2,400 sq ft$6,500 to $12,000per home. Same Edmonton guide, labelled a 2024 price guide in its body | $6,500 | $12,000 |
| Full home Poly-B replacement$6,000 to $20,000per home. Can run higher | $6,000 | $20,000 |
| Poly-B replacement$4,500 to $15,000per home. An Edmonton plumber's guide. The page shows no publication date and was last updated in January 2025 | $4,500 | $15,000 |
| Whole home repipe (Poly-B replacement)$5,000 to $15,000per home. Can run higher. Published for Calgary, Edmonton and nearby towns together, so not an Edmonton-only figure. The same range is on the Calgary page | $5,000 | $15,000 |
Prices in CAD as local contractors publish them. Most do not say whether 5% GST is included, so ask for GST as its own line. Alberta has no PST. Checked October 2026.
Five companies publish Poly-B prices that apply to Edmonton, and their ranges overlap without matching, so the main table shows each one on its own row. For a typical detached or two-storey home, the published ranges mostly sit between $6,500 and $14,000, with some companies going higher. Other jobs, from toilets to backwater valves, are in the Edmonton plumbing guide.
Two cautions. One Edmonton company's guide calls itself a 2024 price guide in the body even though its title says 2026, so check the date on any quote you hold it against. Another installer, and a utility's home services arm, each publish one price list for Calgary and Edmonton together. If you are finishing a basement, repipe before the drywall goes up; the Edmonton basement development guide covers that project.
Want a real number for your repipe?
How much does a repipe cost for each size of Edmonton home?
An installer pricing Calgary and Edmonton together quotes $4,500 to $6,500 for a condo under 1,000 sq ft and $8,500 to $12,500 for a detached home of 1,400 to 2,200 sq ft.
Poly-B repipe prices by home size (Calgary and Edmonton list)
Low to high range
| Job | Low | High |
|---|---|---|
| Poly-B repipe, condo or apartment under 1,000 sq ft$4,500 to $6,500per home. Fixed-price quote range covering removal, PEX, pressure testing, permit, drywall restoration and cleanup. Published for Calgary and Edmonton together by a company serving both cities, so it is not an Edmonton-only figure. The same range is on the Calgary page | $4,500 | $6,500 |
| Poly-B repipe, bungalow or townhome 1,000 to 1,400 sq ft$6,500 to $9,000per home. Fixed-price quote range covering removal, PEX, pressure testing, permit, drywall restoration and cleanup. Published for Calgary and Edmonton together by a company serving both cities, so it is not an Edmonton-only figure. The same range is on the Calgary page | $6,500 | $9,000 |
| Poly-B repipe, detached home 1,400 to 2,200 sq ft$8,500 to $12,500per home. Fixed-price quote range covering removal, PEX, pressure testing, permit, drywall restoration and cleanup. Published for Calgary and Edmonton together by a company serving both cities, so it is not an Edmonton-only figure. The same range is on the Calgary page | $8,500 | $12,500 |
| Poly-B repipe, large home or finished basement over 2,200 sq ft$12,000 to $16,000per home. Fixed-price quote range covering removal, PEX, pressure testing, permit, drywall restoration and cleanup. Can run higher. Published for Calgary and Edmonton together by a company serving both cities, so it is not an Edmonton-only figure. The same range is on the Calgary page | $12,000 | $16,000 |
Prices in CAD as local contractors publish them. Most do not say whether 5% GST is included, so ask for GST as its own line. Alberta has no PST. Checked October 2026.
What extra costs come with an Edmonton repipe?
Drywall patching and paint add $500 to $1,500 when they are not in the quote, and permits and inspection add about $300 to $600, one Edmonton repipe company estimates.
Edmonton repipe extras and reported jobs
Low to high range
| Job | Low | High |
|---|---|---|
| Drywall repair and paint touch-ups after a repipe$500 to $1,500per home. Depends on surface area and wall finish | $500 | $1,500 |
| Permits and inspection for a repipe$300 to $600per home. An Edmonton repipe company's estimate, not a City fee | $300 | $600 |
| Worked example: 1989 split-level repipe, 6 days$9,200per home. One company's reported job, including painted drywall restoration | $9,200 | $9,200 |
| Worked example: three bedroom bungalow repipe$7,600per home. One company's reported job, including drywall repair | $7,600 | $7,600 |
Prices in CAD as local contractors publish them. Most do not say whether 5% GST is included, so ask for GST as its own line. Alberta has no PST. Checked October 2026.
What drives the cost of an Edmonton Poly-B repipe?
Labour is the biggest share, so the size of the home, the number of fixtures and how much wall has to be opened decide most of the price.
- Labour. Labour makes up 50 to 60% of the total, an Edmonton repipe company reports. [1]
- Bathrooms and fixtures. Each extra bathroom or fixture adds connections and labour, an Edmonton plumber says, and larger two-storey homes with several bathrooms tend to sit at the top of its range. [2]
- Access. An unfinished basement lets the crew run new pipe without opening walls. Finished basements and closed ceilings mean more drywall to cut and patch. [2]
- Pipe choice. Edmonton plumbers usually repipe in PEX because it is cost-effective, and the same plumber says copper would likely raise the price. [2]
- Other work at the same time. The plumber reconnects the hot water tank during a repipe anyway, so if yours is old it can make sense to price a tank swap in the same visit.
What have real Edmonton repipes cost?
One Edmonton company reports a 1989 split-level repipe at $9,200 and a three bedroom bungalow at $7,600 with drywall repair.
1989 split-level, south Edmonton
Repiped in 6 days for $9,200, including painted drywall restoration. [1]
Three bedroom bungalow, west Edmonton
Repiped for $7,600 with the wall finishes done. The company gives no duration for this job. [1]
How long does a Poly-B repipe take in Edmonton?
Plan on 3 to 4 days for a condo or small home and up to 7 business days for a large or multi-storey house, an Edmonton repipe company says.
Why replace Poly-B before it leaks?
Insurance and pipe life are the two reasons Edmonton plumbers give, though the insurance claims come from plumbers, a broker and Alberta's realtor association rather than from any insurer or regulator.
Insurance
An Edmonton plumber reports that some insurers offer discounts once Poly-B is replaced with PEX, and that insurers sometimes pay for the replacement. A Canadian insurance broker and the Alberta Real Estate Association describe the other side: surcharges, deadlines to replace and refusals for homes that still have it. We found no insurer or regulator saying this directly. [3] [8] [7]
Pipe life
An Edmonton plumber gives Poly-B about 10 to 15 years from installation, against 30 to 50 years for PEX and 50 to 70 for copper. The Alberta Real Estate Association is more generous, saying Poly-B commonly lasts 20 to 30 years when properly installed. [9] [7]
What Edmonton rules apply to a Poly-B repipe?
An Edmonton repipe needs a City plumbing permit before work starts, and a City-licensed contractor does the work unless you own and live in a detached house and do it yourself.
Does a Poly-B repipe need a permit in Edmonton?
Yes. The City of Edmonton requires a plumbing permit when plumbing is installed or altered, and the permit has to be issued before work starts. Replacing a single fixture in the same place needs no permit, but a whole-house repipe replaces the system itself. Contractors must hold a City of Edmonton licence. [6]
Can you repipe your own Edmonton home?
Only if you own and live in a single detached house and do the work yourself under a homeowner permit, says the City of Edmonton. Owners of condos, townhomes and rentals fall outside the homeowner permit and need a licensed contractor. A Safety Codes inspector visits once the work reaches the right stage. [6]
What should an Edmonton Poly-B quote include?
An Edmonton repipe quote should spell out the fixtures covered, full removal, the new pipe, permit and inspection, drywall and paint, the number of days, the warranty and GST.
- Home size and the count of bathrooms and fixtures being reconnected
- Removal of all Poly-B, including any found behind walls
- Pipe type, usually PEX, and the fitting type
- The City of Edmonton permit and inspection, and who books them
- Drywall patching, texture and paint, or patching only
- Number of working days and when the water will be off
- The contractor's City of Edmonton business licence
- Warranty on parts and labour
- GST on its own line
Repipe terms on an Edmonton quote
- Polybutylene
- The plastic Poly-B pipe is made from. The Alberta Real Estate Association says the resin stopped being made in 1998. [7]
- Manifold
- A central fitting that feeds separate water lines out to each fixture, often used with PEX.
- Pressure test
- Filling the new pipe and holding it under pressure to check for leaks before the walls are closed. One installer includes it in its fixed price. [5]
Edmonton Poly-B questions
How much does it cost to replace Poly-B in an Edmonton condo?
About $3,500 to $5,000 for a condo or townhome, according to one Edmonton repipe company, and $4,500 to $6,500 for a condo under 1,000 sq ft from an installer pricing Calgary and Edmonton together. Check with your condo board first, since some of the pipe may be shared.
Does a Poly-B repipe include drywall repair in Edmonton?
Not always. One Edmonton company prices drywall repair and paint touch-ups separately at $500 to $1,500, while an installer covering Calgary and Edmonton includes drywall restoration in its fixed price. Ask each company to say in writing whether texture and paint are part of the job.
How do I know if my Edmonton house has Poly-B?
Check the build year and the pipe. A house built from about 1980 to 1998 with grey plastic pipe in the utility room likely has Poly-B, says the Alberta Real Estate Association, and markings that start with PB confirm it. A plumber can confirm it in a short visit.
Will insurance pay to replace Poly-B in Edmonton?
Do not count on it, but ask. One installer reports that insurers treat replacement as maintenance, while an Edmonton plumber says insurers sometimes pay and some give a discount after a repipe. Call your insurer before you book, and ask what proof it will want afterward.
Sources
- Poly B Repiping Cost Edmonton, Urban Piping (Edmonton Poly-B replacement company). Published 2025-08-09. Checked 2026-10-29.
- Poly-B Pipe Replacement Cost in Edmonton, Always Plumbing & Heating (Edmonton plumbing company). Checked 2026-10-29.
- Poly B Replacement in Edmonton: A Comprehensive Guide, First Choice Plumbing and Heating (Edmonton and St. Albert). Checked 2026-10-29.
- Poly B Replacement, ATCO Energy home services (Calgary, Edmonton and area). Checked 2026-10-29.
- Poly B Removal in Alberta: Process, Cost & Myths (2026), Poly B Plumbing Guys (Calgary and Edmonton Poly-B replacement company). Published 2026-04-10. Checked 2026-10-29.
- Plumbing Permit, City of Edmonton. Checked 2026-10-29.
- What should I know about Poly-B piping in homes?, Alberta Real Estate Association. Published 2025-01-16. Checked 2026-10-29.
- Has your broker asked if you have Polybutylene (Poly-B) plumbing?, Westland Insurance (insurance broker). Published 2023-09-07. Checked 2026-10-29.
- What You Need to Know About Poly B Piping Replacement, Mr. Rooter Plumbing of Edmonton. Published 2025-02-28. Checked 2026-10-29.