How much does furnace repair cost in Edmonton?
Furnace repairs in Edmonton run from $100 to $200 for a flame sensor to $500 to $1,500 for a heat exchanger, according to a local installer's 2026 guide. A service call or diagnostic fee is $100 to $150. Which part failed, and how old the furnace is, decide whether a repair is worth it.
By the CostGuide.ca editorial team. Published 28 October 2026. Prices checked October 2026 against 8 sources.
Get a quote from a local furnace technician
How much does each furnace repair cost in Edmonton?
A flame sensor clean or replacement is the cheapest common furnace repair in Edmonton at $100 to $200, and a heat exchanger is the costliest at $500 to $1,500.
Edmonton furnace repair prices
Low to high range
| Job | Low | High |
|---|---|---|
| Furnace service call or diagnostic fee$100 to $150per visit | $100 | $150 |
| Flame sensor cleaning or replacement$100 to $200per repair | $100 | $200 |
| Ignitor replacement$150 to $300per repair | $150 | $300 |
| Blower motor replacement$300 to $600per repair | $300 | $600 |
| Gas valve replacement$300 to $700per repair | $300 | $700 |
| Control board replacement$400 to $900per repair | $400 | $900 |
| Heat exchanger replacement$500 to $1,500per repair. Can run higher | $500 | $1,500 |
| Furnace tune-up$100 to $200per visit. An Edmonton installer's range and another company's advertised flat price | $100 | $200 |
Prices in CAD as local contractors publish them. Most do not say whether 5% GST is included, so ask for GST as its own line. Alberta has no PST. Checked October 2026.
The repair ranges come from one Edmonton heating company's 2026 guide, which calls them estimates and does not say whether GST is included. The tune-up range adds another company's advertised flat price.
Want a real number for your furnace?
How does a big repair compare with a new furnace in Edmonton?
A heat exchanger repair at $500 to $1,500 can reach a large share of a new furnace, which costs $4,500 to $6,500 fully installed in a standard Edmonton home.
Edmonton repair and replacement prices side by side
Low to high range
| Job | Low | High |
|---|---|---|
| Blower motor replacement$300 to $600per repair | $300 | $600 |
| Heat exchanger replacement$500 to $1,500per repair. Can run higher | $500 | $1,500 |
| Mid efficiency furnace (80% AFUE), installed$3,500 to $5,000per home. Vents through a metal flue pipe | $3,500 | $5,000 |
| Standard single-family home, mid to high efficiency furnace, fully installed$4,500 to $6,500per home. What one Edmonton installer says most standard homes pay | $4,500 | $6,500 |
| High efficiency furnace, installed$5,000 to $10,000per home. Two Edmonton installers' ranges, one for 96 to 98% AFUE. Vents through PVC pipe. Can run higher | $5,000 | $10,000 |
Prices in CAD as local contractors publish them. Most do not say whether 5% GST is included, so ask for GST as its own line. Alberta has no PST. Checked October 2026.
Should you repair or replace your furnace in Edmonton?
Repair when the furnace is well inside its 15 to 20 year life and the fix is a single part, and replace when the 5,000 rule says the furnace is close to the end.
- Check the age. Edmonton heating companies put the normal life of a residential furnace at 15 to 20 years with proper maintenance, and say units past 15 to 18 years are close to the end. [1] [7]
- Run the 5,000 rule. Multiply the furnace's age in years by the repair quote. One Edmonton company says a result over 5,000 points to replacing. A 12 year old furnace needing a $400 control board scores 4,800, so the repair still makes sense, while the same repair on an 18 year old furnace scores 7,200. [1]
- Price the alternative. A new high efficiency furnace in Edmonton costs $5,000 to $10,000 installed, and the City of Edmonton says a new furnace in an average home usually earns its cost back in energy savings inside 10 years. [8]
Does a furnace tune-up prevent repairs in Edmonton?
It can head some off: an Edmonton installer says an annual tune-up at $100 to $200 can catch problems before they become expensive repairs.
What a tune-up covers
One company's tune-up checklist, offered in Edmonton and Calgary, covers the thermostat and safety switches, drains and hoses, flame sensor cleaning, igniter readings, the blower motor, and gas lines and valves checked for leaks. [2]
Who is allowed to repair a gas furnace in Edmonton?
In Edmonton, gas work on a furnace needs a certified gas fitter or a registered apprentice, and contractors doing gas work must hold a City of Edmonton licence.
Does a furnace repair need a certified gas fitter in Edmonton?
For work on the gas side, yes. To work on natural gas and propane equipment in Alberta you need a certificate recognized by Alberta Apprenticeship and Industry Training, or to be a registered apprentice (as at March 2026). The rule comes from the Skilled Trades and Apprenticeship Education Act. Edmonton heating companies say anyone working on gas-fired equipment must hold a valid gas fitting licence. [5] [1]
When does furnace work need a gas permit in Edmonton?
When gas equipment such as a furnace is installed, altered or relocated, the Safety Codes Act requires a gas permit, and Edmonton says it must be issued before the work starts (as at October 2026). Ask your technician whether your repair counts. A homeowner permit is only for an owner who lives in a single detached house and is working on its existing gas system, and contractors must be licensed with the City. [6]
What should an Edmonton furnace repair quote include?
Before an Edmonton technician starts, get the fault, the part, the labour, the service call fee, the warranty and GST in writing.
- What failed and how the technician found it
- The part name and whether it is in stock
- Parts and labour as separate lines, or one flat price for the whole repair
- Whether the service call fee comes off the repair
- The technician's gas fitter certification for any gas work
- Whether the work needs a gas permit
- The warranty on the repair's parts and labour
- The furnace's age, so you can run the 5,000 rule
- GST listed separately
Furnace repair terms in Edmonton
- Ignitor
- The hot surface part that lights the gas burners each time the thermostat calls for heat. Some quotes spell it igniter.
- Control board
- The furnace's circuit board. It runs the start-up sequence, the blower and the safety checks.
- Service call fee
- The charge for a technician to visit and diagnose the fault, separate from the price of the repair. [1]
Edmonton furnace repair questions
How much is a furnace service call in Edmonton?
A service call or diagnostic fee costs $100 to $150 in Edmonton, according to a local heating company. Ask whether it comes off the repair price if you go ahead, and whether evening or weekend visits cost more.
How much does a new furnace ignitor cost in Edmonton?
An ignitor replacement costs $150 to $300 in Edmonton, which makes it one of the cheaper common repairs. If the furnace is old and other parts are failing too, run the 5,000 rule before paying for a string of small fixes.
Is a cracked heat exchanger a reason to replace the furnace in Edmonton?
Usually, yes. Replacing a heat exchanger costs $500 to $1,500 or more in Edmonton, and heating companies in Calgary treat a crack as a carbon monoxide risk that calls for a new furnace at any age. Ask the technician to show you the crack or the test result.
How much does a blower motor cost to replace in Edmonton?
A blower motor replacement costs $300 to $600 in Edmonton, according to one local repair guide. A Calgary company reports that variable speed motors cost more, so confirm the motor type on your quote before comparing prices.
Sources
- Furnace Repair in Edmonton: The Complete Homeowner's Guide, Dave's Heating & Gas Fitting (Edmonton contractor). Published 2026-07-01. Checked 2026-10-28.
- Furnace Tune-Up, Action Furnace (HVAC contractor serving Calgary, Edmonton and Red Deer). Published 2026-09-01. Checked 2026-10-28.
- How Much Does a New Furnace Cost in Edmonton? (2026 Price Guide), Dave's Heating & Gas Fitting (Edmonton contractor). Published 2026-07-11. Checked 2026-10-28.
- Furnace Replacement Cost in Edmonton (2026), Hydro-Flo Plumbing & Heating (Edmonton contractor). Published 2026-09-24. Checked 2026-10-28.
- Gasfitter: Certifications in Alberta, Government of Alberta (alis). Published 2026-03-20. Checked 2026-10-28.
- Gas Permit, City of Edmonton. Checked 2026-10-28.
- Complete Furnace Buying Guide for Edmonton Homeowners, Canadian Climate Control (Edmonton HVAC contractor). Published 2025-12-04. Checked 2026-10-28.
- Change Homes for Climate: Home heating, City of Edmonton. Checked 2026-10-28.