CostGuide.ca For contractors

How much does new flooring cost in Vancouver?

New flooring in Metro Vancouver costs $5 to $10 per square foot supply and install for luxury vinyl plank and $10 to $20 for mid-range engineered hardwood. If you buy the planks yourself, LVP labour alone runs $2.50 to $3.75. Product grade, stairs and tearing out the old floor move the price most.

By the CostGuide.ca editorial team. Published 18 November 2026. Prices checked November 2026. The ranges are published prices from 2 contractors and suppliers, not averages. Each row names its source.

Get a quote from a local flooring installer

How much does each type of flooring cost in Vancouver?

Laminate and vinyl plank are the cheapest floors to have supplied and installed in Metro Vancouver at $5 to $9 and $5 to $10 per square foot, while premium engineered hardwood tops the table at $18 to $28.

Metro Vancouver flooring prices per square foot

Low to high range

JobLowHigh
European laminate, supply and install$5 to $9per sq ft, one contractor's published price [1]Metro Vancouver figure; material and labour $5 $9
Luxury vinyl plank (LVP), supply and install$5 to $10per sq ft, one contractor's published price [1]Metro Vancouver figure; material and labour $5 $10
Ceramic or porcelain tile floor, supply and install$8 to $18per sq ft, one contractor's published price [1]Metro Vancouver figure $8 $18
Engineered hardwood, mid-range, supply and install$10 to $20per sq ft, one contractor's published price [1]Metro Vancouver figure for many mid-range projects $10 $20
Engineered hardwood, premium grades, supply and install$18 to $28per sq ft, one contractor's published price [1]Metro Vancouver figure $18 $28
Laminate installation, labour only$2.50 to $3.50per sq ft, one contractor's published price [2]Labour only with underlay installation included; flooring bought separately $2.50 $3.50
Luxury vinyl plank installation, labour only$2.50 to $3.75per sq ft, one contractor's published price [2]Labour only with underlay installation included; flooring bought separately $2.50 $3.75
Engineered hardwood installation, labour only$3 to $5per sq ft, one contractor's published price [2]Labour only; flooring bought separately $3 $5
Solid hardwood, floating installation, labour only$4 to $6per sq ft, one contractor's published price [2]Labour only; flooring bought separately $4 $6
Solid hardwood, glue-down installation, labour only$5 to $8per sq ft, one contractor's published price [2]Labour only; flooring bought separately $5 $8

Prices in CAD as local contractors publish them. Most do not say whether 5% GST or 7% PST is included, so ask for each as its own line. Checked November 2026.

The table mixes two kinds of price, and the job name on each row says which. The first five rows are supply and install: the flooring and the labour together, from a Vancouver flooring store's 2026 figures for Metro Vancouver. The last five are labour only, from a Coquitlam renovation company that installs across Metro Vancouver and leaves the flooring itself for you to buy.

Do not compare a labour only rate with an installed price as if they were the same thing. A labour figure of a few dollars a square foot will look cheap next to an installed range until the cost of the planks, tiles or boards is added. Neither source says whether GST or PST is included.

Prices in Ontario are set out the same way on the Ottawa flooring cost guide, and the Canada flooring cost guide puts Metro Vancouver beside Calgary, Edmonton, Ottawa and Toronto.

Want a real number for your floor?

What do you need?

What extras show up on a Vancouver flooring quote?

Tearing out old tile costs $2.25 to $3.00 per square foot, about double the $1.00 to $1.50 for carpet, and hardwood stairs add $120 to $180 a step in labour.

Metro Vancouver flooring extras and add-ons

Low to high range

JobLowHigh
Carpet removal and disposal$1.00 to $1.50per sq ft, one contractor's published price [2]Metro Vancouver figure $1.00 $1.50
Laminate or vinyl removal and disposal$1.50 to $2.25per sq ft, one contractor's published price [2]Metro Vancouver figure $1.50 $2.25
Tile removal and disposal$2.25 to $3.00per sq ft, one contractor's published price [2]Slower and heavier than other removals $2.25 $3.00
Stairs in laminate or LVP, labour$80 to $120per step, one contractor's published price [2]Labour only $80 $120
Stairs in hardwood, labour$120 to $180per step, one contractor's published price [2]Labour only $120 $180
Baseboard installation$2.00 to $3.50per linear ft, one contractor's published price [2]Removing old baseboard is quoted separately $2.00 $3.50
Transition strip installation$20 to $40per strip, one contractor's published price [2] $20 $40
Minimum service charge$500 to $750per job, one contractor's published price [2]Applies to small jobs $500 $750

Prices in CAD as local contractors publish them. Most do not say whether 5% GST or 7% PST is included, so ask for each as its own line. Checked November 2026.

Should you get a labour only or a supply and install quote in Vancouver?

A supply and install quote is simpler to compare, while a labour only quote suits you if you have already chosen and bought the flooring yourself.

  • Supply and install. One price covers the product and the crew. A Metro Vancouver flooring store puts LVP at $5 to $10 per square foot installed, European laminate at $5 to $9 and ceramic or porcelain tile at $8 to $18. [1]
  • Labour only. The installer brings the tools and the crew but not the floor. A Coquitlam company prices laminate at $2.50 to $3.50 and engineered hardwood at $3 to $5 per square foot, with underlay installation included in every job. [2]
  • What is left out of labour rates. The same company quotes removal, levelling, stairs and baseboard as separate lines because not every job needs them. Add each one that applies to your home before you compare a labour quote with an installed one. [2]
  • Floating or glued solid hardwood. How solid wood goes down changes the labour. A floating solid hardwood floor runs $4 to $6 per square foot in labour, while gluing it down costs $5 to $8. [2]

What drives the cost of new flooring in Vancouver?

The grade of product sets the base price, and removal, stairs, trim and the size of the job decide how far a Metro Vancouver quote rises above it.

  • Product grade. Engineered hardwood has two bands in Metro Vancouver: $10 to $20 per square foot installed for many mid-range projects and $18 to $28 for premium grades. The store notes that engineered boards are more stable than solid wood where humidity and seasonal changes matter. [1]
  • The floor coming out. Removal and disposal of old tile is slower and heavier work, at $2.25 to $3.00 per square foot, against $1.50 to $2.25 for laminate or vinyl. [2]
  • Stairs. Steps are priced one at a time: $80 to $120 each in laminate or LVP and $120 to $180 in hardwood, labour only. [2]
  • Trim and transitions. New baseboard runs $2.00 to $3.50 per linear foot and each transition strip between rooms $20 to $40. [2]
  • Small jobs. A single bedroom or hallway can fall under the minimum service charge of $500 to $750, so grouping rooms into one booking can cost less per square foot. [2]

What should you check before new floors go in a Vancouver home?

Before a Vancouver flooring job starts, know that a plain flooring swap needs no City permit, understand how PST works on installed flooring in BC, and get a WorkSafeBC clearance letter for the installer.

Do you need a permit to replace flooring in Vancouver?

No. The City of Vancouver lists replacing fixtures, cabinets or flooring among projects that do not need a permit (as at November 2026). That covers swapping one floor for another. If the flooring is part of a larger renovation, the rest of that project may still need a permit, so check the City's list for the other work. [3]

Is PST charged on flooring installation in BC?

Not on the labour. The Government of BC says a contractor who supplies and installs goods that become part of your home, such as a fixed floor, pays PST on those goods, and does not charge customers PST for services to real property (as at November 2025). GST still applies. A supply and install price may already have the contractor's PST on materials built in, so ask each installer how tax is shown on the quote. [4]

Can you be on the hook for an installer's WorkSafeBC premiums?

Yes. WorkSafeBC says that if a business you hire is not registered and paying its premiums, you as the customer could be held responsible for them (as at November 2026). WorkSafeBC suggests getting a clearance letter, which shows a business's registration and payment status, for each contractor before the work starts. [5]

What should a Vancouver flooring quote include?

A Vancouver flooring quote should say whether it is labour only or supply and install, list removal, stairs and trim as separate lines, and show GST and any PST clearly.

  • Labour only or supply and install, stated at the top
  • Product maker, line and grade if the installer supplies the floor
  • Measured square footage and the waste allowance
  • Removal and disposal of the old floor, priced by type
  • Stairs priced per step, with the material named
  • Baseboard, transition strips and whether old baseboard comes off
  • Any minimum service charge for a small job
  • GST shown on its own line, and how PST on materials is handled

Flooring terms on a Vancouver quote

Labour only
A price for installation alone. You buy the flooring separately, and removal, stairs and trim are usually added as their own lines. [2]
Floating floor
A floor that rests on the underlay or subfloor instead of being glued or nailed down. For solid hardwood, floating costs less in labour than a glue-down install. [2]
Underlay
The thin layer laid under laminate or vinyl plank. A Metro Vancouver installer includes fitting it in every installation price. [2]

Vancouver flooring questions

What does it cost to redo carpeted stairs in vinyl plank in Vancouver?

Labour runs $80 to $120 per step in laminate or LVP, a Metro Vancouver installer reports, and pulling up the old carpet adds $1.00 to $1.50 per square foot. The planks are bought separately on a labour only quote, so ask what the price covers.

Is engineered hardwood or vinyl plank cheaper in Vancouver?

Vinyl plank is cheaper. A Metro Vancouver flooring store prices LVP at $5 to $10 per square foot installed against $10 to $20 for mid-range engineered hardwood. The store says LVP is commonly chosen for kitchens, bathrooms, basements and rental suites, and calls it highly water-resistant.

Why did my Vancouver installer quote a minimum charge?

Because many installers set a floor price for any visit. One Metro Vancouver installer lists a minimum service charge of $500 to $750, so a single small room can cost the same as a slightly larger one. Booking several rooms together spreads that charge over more floor.

Do Vancouver flooring prices include GST and PST?

The Metro Vancouver sources on this page do not say. Prices are shown in Canadian dollars as the businesses publish them. Ask for GST on its own line, and ask how PST on the flooring materials is handled, since in BC the installer pays PST on flooring that becomes part of the home.

Sources

  1. Hardwood vs. Vinyl Plank Flooring in Vancouver: Floors Depot Explains How to Choose the Right Floor in 2026, Floors Depot (flooring store and installer, 1868 Glen Drive, unit 123, Vancouver; principal Alex Mann), press release via 24-7 Press Release. Published 2026-06-27. Checked 2026-11-18.
  2. Flooring Installation Cost Calculator, Craftbuild Renovations Ltd. (828 Gauthier Ave, Coquitlam, BC V3K 0E9). Checked 2026-11-18.
  3. When you need a permit, City of Vancouver. Checked 2026-11-18.
  4. Contractors charging PST (PST and real property contractors), Government of British Columbia. Published 2025-11-27. Checked 2026-11-18.
  5. Homeowners (who needs coverage), WorkSafeBC. Checked 2026-11-18.

Luxury vinyl plank (LVP), supply and install$5 to $10

Get a quote