How much does a concrete driveway cost in Vancouver?
A standard 4 inch concrete driveway in Metro Vancouver costs about $10 to $15 per square foot in one local contractor's 2026 guide, and a Burnaby paving company quotes $12 to $25 or more. A 400 sq ft driveway comes to $4,000 to $6,000. The finish you choose changes the price most.
By the CostGuide.ca editorial team. Published 18 November 2026. Prices checked November 2026. The ranges are published prices from 3 contractors and suppliers, not averages. Each row names its source.
Get a quote from a local concrete contractor
How much does each concrete finish cost per square foot in Vancouver?
Standard concrete is the lowest cost finish in the Metro Vancouver guides at $10 to $15 per square foot, and stamped concrete the highest at $18 to $35.
Metro Vancouver concrete driveway prices per square foot
Low to high range
| Job | Low | High |
|---|---|---|
| Driveway, standard concrete (4 inch)$10 to $15per sq ft, one contractor's published price [1]Metro Vancouver contractor, driveway cost guide | $10 | $15 |
| Driveway, standard concrete, replacement guide$8 to $15per sq ft, one contractor's published price [2]Same contractor, replacement guide published the same day | $8 | $15 |
| Concrete driveway, finish not stated$12 to $25per sq ft, one contractor's published price [3]Greater Vancouver figure from a Burnaby paving company. Can run higher | $12 | $25 |
| Driveway, exposed aggregate$14 to $22per sq ft, one contractor's published price [1]Metro Vancouver contractor, driveway cost guide | $14 | $22 |
| Driveway, exposed aggregate, replacement guide$12 to $20per sq ft, one contractor's published price [2]Same contractor, replacement guide published the same day | $12 | $20 |
| Driveway, stamped$18 to $35per sq ft, one contractor's published price [1]Metro Vancouver contractor, driveway cost guide | $18 | $35 |
| Driveway, stamped, replacement guide$15 to $30per sq ft, one contractor's published price [2]Same contractor, replacement guide published the same day | $15 | $30 |
Prices in CAD as local contractors publish them. Most do not say whether 5% GST or 7% PST is included, so ask for each as its own line. Checked November 2026.
This page rests on a small set of sources. Most rows come from two 2026 guides by one Vancouver contractor, published on the same day, and they do not agree: the replacement guide gives a lower range for every concrete finish. We show both as separate rows rather than pick one.
The only independent figure comes from a Burnaby paving company and covers concrete driveways in general, without naming a finish. None of these guides says exactly what its rates include, so treat them as a starting point for quotes, not a survey of the market. Finish by finish, the ranges sit close to those in our Toronto and GTA guide, which draws on more sources.
Want a real number for your driveway?
What does a 400 sq ft driveway cost in Vancouver by surface?
A 400 sq ft standard concrete driveway costs $4,000 to $6,000 in one Metro Vancouver guide and $3,200 to $6,000 in the same contractor's replacement guide, while stamped concrete for the same size runs $7,200 to $14,000.
Metro Vancouver driveways: 400 sq ft totals and other surfaces
Low to high range
| Job | Low | High |
|---|---|---|
| Driveway, 400 sq ft, standard concrete$4,000 to $6,000per driveway, one contractor's published price [1]Driveway cost guide | $4,000 | $6,000 |
| Driveway, 400 sq ft, standard concrete, replacement guide$3,200 to $6,000per driveway, one contractor's published price [2]Same contractor, replacement guide | $3,200 | $6,000 |
| Driveway, 400 sq ft, exposed aggregate$5,600 to $8,800per driveway, one contractor's published price [1]Driveway cost guide | $5,600 | $8,800 |
| Driveway, 400 sq ft, exposed aggregate, replacement guide$4,800 to $8,000per driveway, one contractor's published price [2]Same contractor, replacement guide | $4,800 | $8,000 |
| Driveway, 400 sq ft, stamped$7,200 to $14,000per driveway, one contractor's published price [1]Driveway cost guide | $7,200 | $14,000 |
| Asphalt driveway, for comparison$5 to $9per sq ft, one contractor's published price [1]Driveway cost guide | $5 | $9 |
| Asphalt driveway, for comparison, replacement guide$4 to $8per sq ft, one contractor's published price [2]Same contractor, replacement guide | $4 | $8 |
| Driveway, interlocking paving stones$20 to $35per sq ft, one contractor's published price [1]Pavers, not poured concrete. Driveway cost guide | $20 | $35 |
| Driveway, interlocking pavers, replacement guide$18 to $40per sq ft, one contractor's published price [2]Pavers, not poured concrete. Same contractor, replacement guide | $18 | $40 |
| Driveway, permeable pavers$22 to $45per sq ft, one contractor's published price [2]Pavers that let rain drain through. Replacement guide | $22 | $45 |
Prices in CAD as local contractors publish them. Most do not say whether 5% GST or 7% PST is included, so ask for each as its own line. Checked November 2026.
Should you choose concrete, pavers or asphalt in Vancouver?
On upfront price, concrete sits between asphalt and pavers in the Metro Vancouver guides, and one local contractor expects standard concrete to outlast asphalt by a decade or more.
Asphalt
The lowest upfront cost at $5 to $9 per square foot in one guide. The same contractor expects 15 to 20 years from it, with sealing every 3 to 5 years. [1] [2]
Standard or exposed aggregate concrete
Standard concrete costs $10 to $15 per square foot and exposed aggregate $14 to $22. The contractor lists 25 to 40 years for both, with low upkeep and occasional sealing. [1] [2]
Stamped concrete
Stamped work costs $18 to $35 per square foot. It is listed at 20 to 35 years and needs regular sealing to hold its look. [1] [2]
Interlocking pavers
Pavers cost $20 to $35 per square foot in one guide and $18 to $40 in the other. The contractor lists 30 to 50 years and notes that single pavers are easy to repair. [1] [2]
Permeable pavers
The dearest option at $22 to $45 per square foot. A Vancouver contractor notes that local stormwater rules increasingly favour permeable surfaces, and that some municipalities give credits on development permits for them. [2]
Why do Vancouver driveway quotes differ so much?
Vancouver driveway quotes differ mainly because each covers a different scope, and the published ranges here do not say what is included.
- Unclear scope. None of the Metro Vancouver guides on this page lists what its rates cover, such as removal of the old driveway, base work or sealing. Ask every contractor to break those out so you can line quotes up. [1] [3]
- Base and drainage. A Burnaby paving company says concrete or asphalt can last for decades, and ties a long life to a properly prepared base and effective drainage. On a wet coastal site, ask how water will leave the driveway. [3]
- Finish. Exposed aggregate adds to the standard rate, and stamped work adds more again. In the replacement guide, stamped concrete runs $15 to $30 per square foot. [2]
- Crossing work. A new or wider driveway may need a new crossing over the boulevard. In Burnaby the owner pays for it, and the City contacts you about the fee for its share of the work after it reviews your plan. Ask your own municipality how it handles crossings before you compare quotes. [4]
What should you check before a driveway project in Metro Vancouver?
Check with your own municipality before work starts, because permits, crossing fees and who pays for the crossing differ between Vancouver, Burnaby and the other Metro Vancouver cities.
Do you need a permit to build or widen a driveway in Burnaby?
Yes. The City of Burnaby says you need a permit to build or widen a driveway (as at November 2026). For a project with no other construction, or only a minor driveway change, the City asks you to email its Transportation Division. A traffic technician and an engineering inspector review the plan before the City contacts you about fees. [4]
Who pays for a new driveway crossing in Burnaby?
The owner does. Burnaby owners pay for new driveway crossings and for removing crossings they no longer use, and the City contacts them about the fee for its share of the work and the final inspection (as at November 2026). The site plan should show the existing and proposed driveway, its location, width and slope, and any nearby trees, hydro poles, lamp standards or hydrants. [4]
Does a Vancouver driveway need a building permit?
Usually not. A Vancouver contractor reports that driveway work typically does not need a building permit in Metro Vancouver (as at March 2026). The same contractor says approval may be needed if the work changes drainage, connects to a City lane or adds hard surface beyond zoning limits, so check with your municipality before you book. [1]
What should a Vancouver concrete driveway quote include?
A Vancouver driveway quote should list the area, finish, slab thickness, removal, base and drainage work, permits and crossing work, sealing and tax, because the published guides leave most of these out.
- Measured area and the rate per square foot for your chosen finish
- Slab thickness (one guide's standard rate assumes a 4 inch slab)
- Removal and disposal of the old driveway, included or priced apart
- Base preparation and a drainage plan for wet weather
- Who applies for any municipal permit or crossing approval, and who pays for the crossing
- Sealing schedule and whether a first coat is included
- Warranty terms in writing
- GST and PST each shown as their own line
Driveway terms on a Vancouver quote
Vancouver concrete driveway questions
Is concrete cheaper than pavers for a Vancouver driveway?
Yes, on upfront price in the Metro Vancouver guides on this page. Standard concrete costs $10 to $15 per square foot in one, against $20 to $35 for interlocking paving stones in the same guide. Stamped concrete overlaps with pavers, so compare finishes as well as materials.
How long does a concrete driveway last in Vancouver?
About 25 to 40 years for standard or exposed aggregate concrete, according to one Vancouver contractor, and 20 to 35 years for stamped. The same contractor lists 15 to 20 years for asphalt. A Burnaby paving company adds that a properly prepared base and good drainage help either surface last for decades.
Why do the two Vancouver guides give different prices?
The contractor does not explain it. Its driveway cost guide and its replacement guide were published on the same day with different ranges for each concrete finish, so we show both. Use them as rough bounds, and rely on written quotes for your own site.
How much is a driveway crossing permit in Vancouver?
We could not confirm a current figure. The City of Vancouver sets crossing fees under its Crossing By-law, but we could not open a City fee page that confirms the 2026 amounts, so ask the City or your contractor before you budget. In Burnaby, the City sets its fee after reviewing your plan.
Do Vancouver concrete prices include GST and PST?
The guides on this page do not say. None states whether GST or PST is included, so ask each contractor to list both taxes as separate lines. That keeps quotes comparable when one builder includes tax and another does not. For other cities, see concrete prices across Canada.
Sources
- Concrete Driveway Replacement Cost Vancouver 2025, Vancouver General Contractors (contractor, 3689 E 1st Ave #220, Vancouver, BC). Published 2026-03-21. Checked 2026-11-18.
- Driveway Replacement Cost Vancouver 2026, Vancouver General Contractors (contractor, 3689 E 1st Ave #220, Vancouver, BC). Published 2026-03-21. Checked 2026-11-18.
- Asphalt vs Concrete Driveway Cost in Vancouver: Which Is Worth It?, Burnaby Blacktop (paving contractor, 4641 Byrne Rd., Burnaby, BC). Published 2026-06-15. Checked 2026-11-18.
- Driveway crossing, City of Burnaby. Checked 2026-11-18.